Changes

EM.Tempo

350 bytes added, 13:57, 17 May 2017
/* A Note on Active Devices */
{{Note|If you want to use a B-type nonlinear dependent source in the Netlist definition of an active one-port or two-port, it must be contained in a subcircuit definition rather than in the main circuit.}}
 
The figure below shows the geometry of a two-port amplifier device with microstrip input and output transmission lines. The Netlist of the two-port device uses a B-type nonlinear dependent source as follows:
 
----
 
C1 1 0 1p
 
X1 1 0 2 0 amp_dev
 
.subckt amp_dev 1 2 3 4
 
R1 1 2 50
 
B1 3 4 v = 20*v(1,2)
 
.ends
 
RS 2 3 10
 
R2 3 0 50
 
C2 3 0 1
 
----
== EM.Tempo's Observables & Simulation Data Types==
Kazem Sabet
28,333
edits