Changes

=== Visualizing The Near Fields ===

In order to view the near field distributions, you must first define field sensor observables before running the planar MoM simulation. To do that, right click on the '''Field Sensors''' item in the '''Observables''' section of the Navigation Tree and select '''Insert New Observable...'''. The Field Sensor Dialog opens up. At the top of the dialog and in the section titled '''Sensor Plane Location''', first you need to set the plane of near field calculation. In the dropdown box labeled '''Direction''', you have three options X, Y, and Z, representing the"normals" to the XY, YZ and ZX planes, respectively. The default direction is Z, i.e. XY plane parallel to the substrate layers. In the three boxes labeled '''Coordinates''', you set the coordinates of the center of the plane. Then, you specify the '''Size''' of the plane in project units, and finally set the '''Number of Samples''' along the two sides of the sensor plane. The larger the number of samples, the smoother the near field map will appear.