Figure 1: [[Planar Module]]'s Layer Stack-up dialog showing the Embedded Sets tab.
To add a new object set, click the arrow symbol on the '''Insert''' button of the dialog and select one of the two options, '''PEC Via Set''' or '''Embedded Dielectric Set''', from the dropdown list. This opens up a new dialog where first you have to set the host layer of the new object set. A dropdown list labeled "'''Host Layer'''" gives a list of all the available finite substrate layers. You can also set the properties of the embedded object set, including its label, color and material properties. Keep in mind that you cannot control the height of embedded objects. Moreover, you cannot assign material properties to PEC via sets, while you can set values for the '''Permittivity'''(ε<sub>r</sub>) and '''Electric Conductivity'''(σ) of embedded dielectric sets. Vacuum is the default material choice. You may use EM.Cube's Material List for this purpose, which can be opened up by clicking the '''Material'''button. Once embedded object sets are added to the Embedded Sets table, you can edit their properties at any time by selecting their row and clicking the '''Edit''' button.
[[File:PMOM21.png]] [[File:PMOM22.png]]