|}
DIALOG PARAMETERS<table><tr><td> '''X Diameter''' and '''Y Diameter''' together establish the area of the Ellipse Strip. '''Lock Base''' anchors the Ellipse Strip's LCS origin to its current location. The diagram below illustrates how the Lock Base option controls parameter changes made to the X and Y diameter. [[FileImage:lock_base_tncad_surf4.jpgpng|lock basethumb|left|480px|The property dialog of the ellipse strip object.]]</td>'''Start Angle''' and '''End Angle''' defines the area around the z-axis that will be drawn. The default value for both the Start and End angle parameters is 0.</tr><tr><td> [[FileImage:cad_surf4resize_elliptical_strip_new.png|thumb|left|550px|The geometry of the ellipse strip object.]]</td></tr><tr><td> [[FileImage:draw_modes_tnlock_base_tn.jpg|drawing modesthumb|left|550px|Locking the base of an ellipse strip.]]</td></tr><tr><td> [[FileImage:resize_elliptical_strip_newdraw_modes_tn.png|circlethumb|left|550px|The different drawing modes of ellipse strip.]]</td></tr></table>
== Triangle Strip Tool ==