At the end of a SBR simulation, each receiver receives a number of rays. Some receivers may not receive any rays at all. You can visualize all the rays received by a certain receiver from the active transmitter of the scene. To do this, right click the '''Receivers''' item of the Navigation Tree. From the context menu select '''Show Received Rays'''. All the rays received by the currently selected receiver of the scene are displayed in the scene. The rays are identified by labels, are ordered by their power and have different colors for better visualization. You can display the rays for only one receiver at a time. The receiver set property dialog has a list of all the individual receivers belonging to that set. To display the rays received by another receiver, you have to change the '''Selected Receiver''' in the receiver set's property dialog. If you keep the mouse focus on this dropdown list and roll your mouse scroll wheel, you can scan the selected receivers and move the rays from one receiver to the next in the list. To remove the visualized rays from the scene, right click the Receivers item of the Navigation Tree again and from the context menu select '''Hide Received Rays'''.
[[File:prop_run5_tn.png|800px]]
Visualization of received rays at the location of the selected receiver.
Note: The rays are summed up coherently at the receiver.
[[File:prop_run6_tn.png|800px]]
Figure: Analyzing a selected ray from the ray data dialog.
=== Plotting Other Simulation Results ===