Changes

[[Image:Splash-mom.jpg|right|800px720px]]<strong><font color="#06569f" size="4">3D Wire MoM And Surface MoM Solvers For Simulating Free-Space Structures</font></strong><table><tr><td>[[image:Cube-icon.png | link=Getting_Started_with_EM.Cube]] [[image:cad-ico.png | link=Building_Geometrical_Constructions_in_CubeCAD]] [[image:fdtd-ico.png | link= An EM.Tempo]] [[image:prop-ico.png | link=EM.Terrano]] [[image:static-ico.png | link=EM.Ferma]] [[image:planar-ico.png | link=EM.Picasso]] [[image:po-ico.png | link=EM.Illumina]]</td><tr></table>[[Image:Tutorial_icon.png|30px]] '''[[EM.Cube#EM.Libera_Documentation | EM.Libera Primer Tutorial Gateway]]''' [[Image:Back_icon.png|30px]] '''[[EM.Cube | Back to EM.Cube Main Page]]'''==Product Overview==

[[EM.Libera ]] is a full-wave 3D electromagnetic simulator based on the Method of Moments (MoM) for frequency domain modeling of free-space metallic structures made up of metal and dielectric structuresregions or a combination of them. It features two full-wave Method of Moments (MoM) separate simulation engines, one based on a Wire Surface MoM formulation solver and the other based on a Surface Wire MoM formulation. In generalsolver, the surface that work independently and provide different types of solutions to your numerical problem. The Surface MoM solver is used to simulate your physical structure, which can be made utilizes a surface integration equation formulation of metallic the metal and dielectric objects of arbitrary shapes as well as composite structures that contain conjoined metal and dielectric regions. If in your project workspace contains at least one line or curve object, EMphysical structure.Libera then invokes its The Wire MoM solver. In that case, can only handle metallic wireframe structures can be modeled, and all . [[EM.Libera]] selects the surface and solid PEC simulation engine automatically based on the types of objects are meshed as wireframespresent in your project workspace.

{{Note|You can use [[EM.Libera either for modeling metallic wire objects and wireframe structures or for simulating arbitrary ]] offers two distinct 3D metallic, dielectric and composite surfaces and volumetric structuresMoM simulation engines. EMThe Wire MoM solver is based on Pocklington's integral equation.Libera also serves as the frequency-domain, full-wave '''[[MoM3D Module]]''' The Surface MoM solver uses a number of surface integral equation formulations of Maxwell'''[[EMs equations.Cube]]'''In particular, a comprehensiveit uses an electric field integral equation (EFIE), integratedmagnetic field integral equation (MFIE), modular electromagnetic or combined field integral equation (CFIE) for modeling environmentPEC regions. EM.Libera shares On the visual interface, 3D parametric CAD modeler, data visualization toolsother hand, the so-called Poggio-Miller-Chang-Harrington-Wu-Tsai (PMCHWT) technique is utilized for modeling dielectric regions. Equivalent electric and many more utilities magnetic currents are assumed on the surface of the dielectric objects to formulate their assocaited interior and features collectively known as '''[[CubeCAD]]''' with all of [[EM.Cube]]'s other computational modulesexterior boundary value problems.}}

{{Note|In general, [[EM.Libera]] uses the surface MoM solver to analyze your physical structure. If your project workspace contains at least one line or curve object, [[EM.Libera]] switches to the Wire MoM solver.}} [[Image:Info_icon.png|40px30px]] Click here to learn more about the theory of the '''[[Getting_Started_with_EM.CUBE Basic Principles of The Method of Moments | EM.Cube Modeling Environment3D Method of Moments]]'''.

<table><tr><td>[[Image:Info_iconYagi Pattern.png|40px]] Click here to learn more about thumb|500px|3D far-field radiation pattern of the basic functionality of '''[[CubeCADexpanded Yagi-Uda antenna array with 13 directors.]]'''.</td></tr></table>

=== An Overview EM.Libera as the MoM3D Module of 3D Method Of Moments EM.Cube ===

The Method of Moments (MoM) is a rigorousYou can use [[EM.Libera]] either for simulating arbitrary 3D metallic, dielectric and composite surfaces and volumetric structures or for modeling wire objects and metallic wireframe structures. [[EM.Libera]] also serves as the frequency-domain, full-wave'''MoM3D Module''' of '''[[EM.Cube]]''', numerical technique for solving open boundary a comprehensive, integrated, modular electromagnetic problemsmodeling environment. Using this technique[[EM.Libera]] shares the visual interface, you can analyze electromagnetic radiation3D parametric CAD modeler, data visualization tools, scattering and wave propagation problems with relatively short computation times many more utilities and modest computing resources. The method of moments is an integral equation technique; it solves the integral form of Maxwell’s equations features collectively known as opposed to their differential forms used [[Building Geometrical Constructions in the finite element or finite difference time domain methodsCubeCAD | CubeCAD]] with all of [[EM.Cube]]'s other computational modules.

In a 3D MoM simulation, the currents or fields on the surface of a structure are the unknowns of the problem. The given structure is immersed in the free space. The unknown currents or fields are discretized as a collection of elementary currents or fields with small finite spatial extents. Such elementary currents or fields are called basis functions. They obviously have a vectorial nature and must satisfy [[Maxwell's EquationsImage:Info_icon.png|Maxwell's equations30px]] and relevant boundary conditions individuallyClick here to learn more about '''[[Getting_Started_with_EM. The actual currents or fields on the surface of the given structure (the solution of the problem) are expressed as a superposition of these elementary currents or fields with initially unknown amplitudesCube | EM. Through the MoM solution, you find these unknown amplitudes, from which you can then calculate the currents or fields everywhere in the structureCube Modeling Environment]]'''.

=== Advantages & Limitations of EM.Libera offers two distinct 3D MoM simulation engines. The first one is a Wire MoM solver, which is based on Pocklington's integral equation. This solver can be used to simulate wireframe models of metallic structures and is particularly useful for modeling wire-type antennas and arrays. The second engine features a powerful Surface MoM solver. It can model metallic surfaces and solids as well as solid dielectric objects. The Surface & Wire MoM solver uses a surface integral equation formulation of [[Maxwell's Equations|Maxwell's equations]]. In particular, it uses an electric field integral equation (EFIE), magnetic field integral equation (MFIE), or combined field integral equation (CFIE) for modeling PEC regions. For modeling dielectric regions of the physical structure , the so-called Poggio-Miller-Chang-Harrington-Wu-Tsai (PMCHWT) technique is utilized, in which equivalent electric and magnetic currents are assumed on the surface of the dielectric object to formulate the interior and exterior boundary value problems.Solvers ===

The method of moments uses an open-boundary formulation of Maxwell's equations which does not require a discretization of the entire computational domain, but only the finite-sized objects within it. As a result, [[Image:Info_iconEM.png|40pxLibera]] Click here to learn more about the theory of ''s typical mesh size is typically much smaller that that of a finite-domain technique like [[EM.Tempo]]'s FDTD. In addition, [[3D Method EM.Libera]]'s triangular surface mesh provides a more accurate representation of Momentsyour physical structure than [[EM.Tempo]]'''s staircase brick volume mesh, which often requires a fairly high mesh density to capture the geometric details of curved surfaces. These can be serious advantages when deciding on which solver to use for analyzing highly resonant structures. In that respect, [[EM.Libera]] and [[EM.Picasso]] are similar as both utilize MoM solvers and surface mesh generators. Whereas [[EM.Picasso]] is optimized for modeling multilayer planar structures, [[EM.Libera]] can handle arbitrarily complex 3D structures with high geometrical fidelity.

== Constructing [[EM.Libera]]'s Wire MoM solver can be used to simulate thin wires and wireframe structures very fast and accurately. This is particularly useful for modeling wire-type antennas and arrays. One of the Physical Structure ==current limitations of [[EM.Libera]], however, is its inability to mix wire structures with dielectric objects. If your physical structure contains one ore more wire objects, then all the PEC surface and solid CAD objects of the project workspace are reduced to wireframe models in order to perform a Wire MoM simulation. Also note that Surface MoM simulation of composite structures containing conjoined metal and dielectric parts may take long computation times due to the slow convergence of the iterative linear solver for such types of numerical problems. Since [[EM.Libera]] uses a surface integral equation formulation of dielectric objects, it can only handle homogeneous dielectric regions. For structures that involve multiple interconnected dielectric and metal regions such as planar circuits, it is highly recommended that you use either [[EM.Tempo]] or [[EM.Picasso]] instead.

<table><tr><td>[[Image:wire_pic1Hemi current.png|thumb|350px500px|EM.Libera's Navigation TreeThe computed surface current distribution on a metallic dome structure excited by a plane wave source.]] In EM.Libera, you can create three different types of objects (click on each type to learn more about it):</td></tr></table>

* '''[[Defining_Materials_in_EM== EM.Cube#Perfect_Electric_Conductors_.26_Metal_Traces | Perfect Electric Conductor (PEC) Objects]]'''* '''[[Defining_Materials_in_EM.Cube#Thin_Wires | Thin Wires]]'''* '''[[Defining_Materials_in_EM.Cube#Defining_Dielectric_Materials | Dielectric Objects]]'''Libera Features at a Glance ==

EM.Libera features two different simulation engines: Wire MoM and Surface MoM. Both simulation engines can handle metallic structures. The Wire MoM engine models metallic objects as perfect electric conductor (PEC) wireframe structures, while the Surface MoM engine treats them as PEC surfaces. The PEC objects can be lines, curves, surfaces or solids. All the PEC objects are created under the '''PEC''' node in the '''=== Physical Structure''' section of the Navigation Tree. Objects are grouped together by their color. You can insert different PEC groups with different colors. A new PEC group can be defined by simply right clicking on the '''PEC''' item in the Navigation Tree and selecting '''Insert New PEC...''' from the contextual menu. A dialog for setting up the PEC properties opens up. From this dialog you can change the name of the group or its color. In EM.Libera, PEC objects have an additional property, which is '''Wire Radius''' expressed in project units. This parameter is used in conjunction with Pocklington's integral equation for wire objects only. The line and [[Curve Objects|curve objects]] you draw in the project workspace are not displayed as cylinders with the specified radius.Definition ===

Of EM.Libera's two simulation engines, only the Surface MoM solver can handle dielectric objects. Dielectric objects are created under the '''Dielectric''' node <ul> <li> Metal wires and curves in the '''Physical Structure''' section of the Navigation Tree. They are grouped together by their color free space</li> <li> Metal surfaces and material properties. You can insert different solids in free space</li> <li> Homogeneous dielectric groups with different colors and different permittivity esolid objects in free space<sub/li>r <li> Import STL CAD files as native polymesh structures</subli> <li> Export wireframe structures as STL CAD files</li></ul> and electric conductivity s. Note that a PEC object is the limiting cases of a lossy dielectric material when &sigma; &rarr; &infin;.

{{Note|Under dielectric material groups=== Sources, you cannot draw surface or curve CAD objects.}}Loads &amp; Ports ===

<ul> <li> Gap sources on wires (for Wire MoM) and gap sources on long, narrow, metal strips (for Surface MoM)</li> <li> Gap arrays with amplitude distribution and phase progression</li> <li> Multi-port port definition for gap sources</li> <li> Short dipole sources</li> <li> Import previously generated wire mesh solution as collection of short dipoles</li> <li> RLC lumped elements on wires and narrow strips with series-parallel combinations</li> <li> Plane wave excitation with linear and circular polarizations</li> <li> Multi-Ray excitation capability (ray data imported from [[Image:Info_iconEM.png|40pxTerrano]] Click here to learn more about '''[[Defining_Materials_in_EM.Cube#Defining_a_New_Material_Group | Defining a New Object Group]]'''.or external files)</li> <li> Huygens sources imported from FDTD or other modules with arbitrary rotation and array configuration</li></ul>

[[Image:Info_icon.png|40px]] Click here <ul> <li> Polygonized mesh of curves and wireframe mesh of surfaces and solids for Wire MoM simulation</li> <li> User defined wire radius</li> <li> Connection of wires/lines to learn more about '''[[Defining_Materials_in_EM.Cube#Moving_Objects_among_Material_Groups | Moving Objects among Material Groups]]'''.wireframe surfaces and solids using polymesh objects</li> <li> Surface triangular mesh of surfaces and solids for Surface MoM simulation</li> <li> Local mesh editing of polymesh objects</li></ul>

[[Image:Info_icon.png|40px]] Click here for a general discussion <ul> <li> 3D Pocklington integral equation formulation of '''[[Defining Materials in EM.Cube]]'''.wire structures</li> <li> 3D electric field integral equation (EFIE), magnetic field integral equation (MFIE) and combined field integral equation (CFIE) formulation of PEC structures</li> <li> PMCHWT formulation of homogeneous dielectric objects</li> <li> AIM acceleration of Surface MoM solver</li> <li> Uniform and fast adaptive frequency sweep</li> <li> Parametric sweep with variable object properties or source parameters</li> <li> Multi-variable and multi-goal optimization of scene</li> <li> Fully parallelized Surface MoM solver using MPI</li> <li> Both Windows and Linux versions of Wire MoM simulation engine available</li></ul>

== 3D Mesh = Data Generation &amp; Visualization ===

=== A Note on <ul> <li> Wireframe and electric and magnetic current distributions</li> <li> Near Field intensity plots (vectorial - amplitude &amp; phase)</li> <li> Huygens surface data generation for use in MoM3D or other [[EM.Libera's Mesh Types ===Cube]] modules</li> <li> Far field radiation patterns: 3D pattern visualization and 2D Cartesian and polar graphs</li> <li> Far field characteristics such as directivity, beam width, axial ratio, side lobe levels and null parameters, etc.</li> <li> Radiation pattern of an arbitrary array configuraition of the wire structure</li> <li> Bi-static and mono-static radar cross section: 3D visualization and 2D graphs</li> <li> Port characteristics: S/Y/Z parameters, VSWR and Smith chart</li> <li> Touchstone-style S parameter text files for direct export to RF.Spice or its Device Editor</li> <li> Custom output parameters defined as mathematical expressions of standard outputs</li></ul>

== Building the Physical Structure in EM.Libera features two simulation engines, Wire MoM and Surface MoM, which require different mesh types. The Wire MoM simulator handles only wire objects and wireframe structures. These objects are discretized as elementary linear elements (filaments). A wire is simply subdivided into smaller segments according to a mesh density criterion. Curved wires are first converted to multi-segment polylines and then subdivided further if necessary. At the connection points between two or more wires, junction basis functions are generated to ensure current continuity. ==

On All the other hands, EM.Libera's Surface MoM solver requires a triangular surface mesh of surface objects in your project workspace are organized into object groups based on their material composition and [[Solid Objects|solid objects]].The mesh generating algorithm tries to generate regularized triangular cells with almost equal surface areas across the entire structure. You can control the cell size using geometry type in the "Mesh DensityPhysical Structure" parameter. By default, the mesh density is expressed in terms section of the free-space wavelengthnavigation tree. The default mesh density is 10 cells per wavelengthIn [[EM. For meshing surfaces, a mesh density of 7 cells per wavelength roughly translates to 100 triangular cells per squared wavelength. AlternativelyLibera]], you can base the definition create three different types of the mesh density on "Cell Edge Length" expressed in project units.objects:

{| class="wikitable"|-! scope="col"| Icon! scope="col"| Material Type! scope="col"| Applications! scope="col"| Geometric Object Types Allowed! scope="col"| Restrictions|-| style="width:30px;" | [[ImageFile:Info_iconpec_group_icon.png|40px]] Click here to learn more about ''| style="width:150px;" | [[Glossary of EM.Cube's Materials, Sources, Devices & Other Physical Object Types#Perfect Electric Conductor (PEC) |Perfect Electric Conductor (PEC)]]| style="width:300px;" | Modeling perfect metals| style="width:250px;" | Solid, surface and curve objects| None|-| style="width:30px;" | [[Mesh_Generation_Schemes_in_EMFile:thin_group_icon.png]]| style="width:150px;" | [[Glossary of EM.Cube's Materials, Sources, Devices & Other Physical Object Types#Working_with_Mesh_Generator Thin Wire | Working with Mesh Generator Thin Wire]]| style="width:300px;" | Modeling wire radiators| style="width:250px;" | Curve objects| Wire MoM solver only |-| style="width:30px;" | [[File:diel_group_icon.png]]| style="width:150px;" | [[Glossary of EM.Cube'''s Materials, Sources, Devices & Other Physical Object Types#Dielectric Material |Dielectric Material]]| style="width:300px;" | Modeling any homogeneous material| style="width:250px;" | Solid objects| Surface MoM solver only |-| style="width:30px;" | [[File:Virt_group_icon.png]]| style="width:150px;" | [[Glossary of EM.Cube's Materials, Sources, Devices & Other Physical Object Types#Virtual_Object_Group | Virtual Object]]| style="width:300px;" | Used for representing non-physical items | style="width:250px;" | All types of objects| None |}

[[Image:Info_icon.png|40px]] Click here on each category to learn more details about it in the [[Glossary of EM.LiberaCube's '''[[Mesh_Generation_Schemes_in_EM.Cube#The_Triangular_Surface_Mesh_Generator | Triangular Surface Mesh Generator Materials, Sources, Devices & Other Physical Object Types]]'''.

Both of [[Image:Info_icon.png|40px]] Click here to learn more about EM.Libera]]'s two simulation engines, Wire MoM and Surface MoM, can handle metallic structures. You define wires under '''[[Mesh_Generation_Schemes_in_EM.Cube#The_Linear_Wireframe_Mesh_Generator | Linear Wireframe Mesh Generator ]]Thin Wire'''. === Mesh of Connected groups and surface and volumetric metal objects under '''PEC Objects ===  [[Image:MOM3.png|thumb|300px|EM.Libera's Mesh Hierarchy dialog''.]] All the objects belonging to the same PEC or dielectric group are merged together using the Boolean union operation before meshing. If your structure contains attachedIn other words, interconnected or overlapping [[Solid Objects|solid objects]]you can draw lines, their internal common faces are removed polylines and only the surface of the external faces is meshed. Similarlyother curve objects as thin wires, all the [[Surface Objects|surface objects]] belonging to the same PEC group are merged together and their internal edges are removed before meshingwhich have a radius parameters expressed in project units. Note that a All types of solid and a surface object belonging to the same PEC group might not always CAD objects can be merged properly.  When two objects belonging to two different material groups overlap or intersect each other, EM.Libera has to determine how to designate the overlap or common volume or surface. As an example, the figure below shows a dielectric cylinder sitting on top of drawn in a PEC plate. The two object share a circular area at the base of the cylinder. Are the cells on this circle metallic or do they belong to the dielectric material group? Note that the cells of the junction are displayed in a different color then those of either groups. To address problems of this kind, EM.Libera does provide a "Material Hierarchy" table, which you Only solid CAD objects can modify. To access this table, select be drawn under '''Menu > Simulate < discretization < Mesh Hierarchy...Dielectric Objects'''. The PEC groups by default have the highest priority and reside at the top of the table. You can select an group from the table and change its hierarch using the {{key|Move Up}} or {{key|Move Down}} buttons of the dialog. You can also change the color of junction cells that belong to each group.

<td> [[Image:MOM1wire_pic1.png|thumb|360px350px|A dielectric cylinder attached to a PEC plateEM.Libera's Navigation Tree.]] </td> <td> [[Image:MOM2.png|thumb|360px|The surface mesh of the dielectric cylinder and PEC plate.]] </td>

=== Using Polymesh Objects Once a new object group node has been created on the navigation tree, it becomes the "Active" group of the project workspace, which is always listed in bold letters. When you draw a new CAD object such as a Box or a Sphere, it is inserted under the currently active group. There is only one object group that is active at any time. Any object type can be made active by right clicking on its name in the navigation tree and selecting the '''Activate''' item of the contextual menu. It is recommended that you first create object groups, and then draw new CAD objects under the active object group. However, if you start a new [[EM.Libera]] project from scratch, and start drawing a new object without having previously defined any object groups, a new default PEC object group is created and added to Connect Wires the navigation tree to Wireframe Surfaces === hold your new CAD object.

If the project workspace contains a line object, the wireframe mesh generator is used to discretize your physical structure. From the point of view of this mesh generator, all PEC [[Surface ObjectsImage:Info_icon.png|surface objects30px]] and PEC Click here to learn more about '''[[Solid Building Geometrical Constructions in CubeCAD#Transferring ObjectsAmong Different Groups or Modules |solid objects]] are treated as wireframe objects. If you want to model a wire radiator connected to a metal surface, you have to make sure that the resulting wireframe mesh of the surface has a node exactly at the location where you want to connect your wire. This is not guaranteed automatically. However, you can use [[EM.CubeMoving Objects among Different Groups]]'s polymesh objects to accomplish this objective''.

{{Note|In [[EM.Cube]], polymesh objects are regards you can import external CAD models (such as already-meshed STEP, IGES, STL models, etc.) only to [[Building_Geometrical_Constructions_in_CubeCAD | CubeCAD]]. From [[Building_Geometrical_Constructions_in_CubeCAD | CubeCAD]], you can then move the imported objects and are not re-meshed again during a simulationto [[EM.Libera]].}}

You can convert any surface object or solid object to a polymesh using [[CubeCAD]]== EM.Libera's '''Polymesh Tool'''. Excitation Sources ==

[[Image:Info_iconYour 3D physical structure must be excited by some sort of signal source that induces electric linear currents on thin wires, electric surface currents on metal surface and both electric magnetic surface currents on the surface of dielectric objects.png|40px]] Click here to learn more about '''[[Discretizing_Objects#Converting_Objects_to_Polymesh | Converting Object to Polymesh]]''' The excitation source you choose depends on the observables you seek in your project. [[EM.CubeLibera]].provides the following source types for exciting your physical structure:

Once an object is converted to {| class="wikitable"|-! scope="col"| Icon! scope="col"| Source Type! scope="col"| Applications! scope="col"| Restrictions|-| style="width:30px;" | [[File:gap_src_icon.png]]| [[Glossary of EM.Cube's Materials, Sources, Devices & Other Physical Object Types#Strip Gap Circuit Source |Strip Gap Circuit Source]]| style="width:300px;" | General-purpose point voltage source | style="width:300px;" | Associated with a polymeshPEC rectangle strip, you can place your works only with SMOM solver|-| style="width:30px;" | [[File:gap_src_icon.png]]| [[Glossary of EM.Cube's Materials, Sources, Devices & Other Physical Object Types#Wire Gap Circuit Source |Wire Gap Circuit Source]]| style="width:300px;" | General-purpose point voltage source| style="width:300px;" | Associated with an PEC or thin wire at any line or polyline, works only with WMOM solver|-| style="width:30px;" | [[File:hertz_src_icon.png]]| [[Glossary of its nodesEM. In that caseCube's Materials, Sources, Devices & Other Physical Object Types#Hertzian Short Dipole Source |Hertzian Short Dipole Source]]| style="width:300px;" | Almost omni-directional physical radiator| style="width:300px;" | None, stand-alone source|-| style="width:30px;" | [[File:plane_wave_icon.png]]| [[Glossary of EM.LiberaCube's Wire MoM engine will sense the coincident nodes between line segments and will create a junction basis function to ensure current continuityMaterials, Sources, Devices & Other Physical Object Types#Plane Wave |Plane Wave Source]]| style="width:300px;" | Used for modeling scattering | style="width:300px;" | None, stand-alone source|-| style="width:30px;" | [[File:huyg_src_icon. png]]| [[Glossary of EM.Cube's Materials, Sources, Devices & Other Physical Object Types#Huygens Source |Huygens Source]]| style="width:300px;" | Used for modeling equivalent sources imported from other [[EM.Cube]] modules | style="width:300px;" | Imported from a Huygens surface data file|}

<table><tr><td> Click on each category to learn more details about it in the [[Image:MOM4.png|thumb|360px|Geometry Glossary of a monopole wire connected to a PEC plateEM.Cube's Materials, Sources, Devices & Other Physical Object Types]] </td><td> [[Image:MOM5.png|thumb|360px|Placing the wire on the polymesh version of the PEC plate.]] </td></tr></table>

== Excitation Sources == Your 3D physical structure must be excited by some sort of signal source that induces electric linear currents on thin wires, electric surface currents on metal surface and both electric magnetic surface currents on the surface of dielectric objects. The excitation source you choose depends on the observables you seek in your project. EM.Libera provides the following source types for exciting your physical structure (click on each type to learn more about it):  * '''[[Common_Excitation_Source_Types_in_EM.Cube#Lumped_.26_Gap_Sources | Strip Gap Sources]]'''* '''[[Common_Excitation_Source_Types_in_EM.Cube#Lumped_.26_Gap_Sources | Wire Gap Sources]]'''* '''[[Common_Excitation_Source_Types_in_EM.Cube#Hertzian_Dipole_Sources |Short Dipole Sources]]'''* '''[[Common_Excitation_Source_Types_in_EM.Cube#Plane_Wave_Sources | Plane Wave Sources]]'''* '''[[Hybrid_Modeling_using_Multiple_Simulation_Engines#Working_with_Huygens_Sources | Huygens Sources]]''' For antennas and planar circuits, where you typically define one or more ports, you usually use lumped sources. [[EM.Libera ]] provides two types of lumped sources: strip gap and wire gap. A Gap is an infinitesimally narrow discontinuity that is placed on the path of the current and is used to define an ideal voltage source. Wire gap sources must be placed on '''Thin Wire Line''' and '''Thin Polyline''' objects to provide excitation for the Wire MoM solver. The gap splits the wire into two lines with a an infinitesimally small spacing between them, across which the ideal voltage source is connected.

A short dipole provides another simple way of exciting a 3D structure in [[Image:Info_iconEM.png|40pxLibera]] Click here . A short dipole source acts like an infinitesimally small ideal current source. You can also use an incident plane wave to learn more about '''excite your physical structure in [[Common_Excitation_Source_Types_in_EMEM.Cube#Defining_FiniteLibera]]. In particular, you need a plane wave source to compute the radar cross section of a target. The direction of incidence is defined by the &theta; and &phi; angles of the unit propagation vector in the spherical coordinate system. The default values of the incidence angles are &theta; = 180° and &phi; = 0° corresponding to a normally incident plane wave propagating along the -Sized_Source_Arrays | Using Source Arrays Z direction with a +X-polarized E-vector. Huygens sources are virtual equivalent sources that capture the radiated electric and magnetic fields from another structure that was previously analyzed in Antenna Arraysanother [[EM.Cube]]'''computational module.

<table><tr><td> [[Image:MOM6Info_icon.png|thumb|320px|EM.Libera's Wire Gap Source dialog.40px]] </td><td> Click here to learn more about '''[[Image:MOM6B.pngPreparing_Physical_Structures_for_Electromagnetic_Simulation#Modeling_Finite-Sized_Source_Arrays |thumb|320px|EM.Libera's Strip Gap Using Source dialog.Arrays in Antenna Arrays]] </td></tr><tr></table>'''.

<td> [[Image:wire_pic14_tn.png|thumb|600pxleft|640px|A wire gap source placed on one side of a polyline representing a polygonized circular loop.]] </td>

<td> [[Image:MOM8po_phys16_tn.png|thumb|360px|EM.Libera's Plane Wave dialog.]] </td><td> [[Image:po_phys16_tn.png|thumbleft|360px420px|Illuminating a metallic sphere with an obliquely incident plane wave source.]] </td>

In [[EM.Libera]], you can define simple lumped elements in a similar manner as gap sources. In fact, a lumped element is equivalent to an infinitesimally narrow gap that is placed in the path of the current, across which Ohm's law is enforced as a boundary condition. You can define passive RLC lumped elements or active lumped elements containing a voltage gap source. The latter case can be used to excite a wire structure or metallic strip and model a non-ideal voltage source with an internal resistance. [[EM.Libera]]'s lumped circuit represent a series-parallel combination of resistor, inductor and capacitor elements. This is shown in the figure below:

[[FileImage:image106Info_icon.png|40px]]Click here to learn more about '''[[Preparing_Physical_Structures_for_Electromagnetic_Simulation#Modeling_Lumped_Elements_in_the_MoM_Solvers | Defining Lumped Elements]]'''.

[[FileImage:wire_pic16_tnInfo_icon.png|thumb|200px|Active lumped element with 40px]] Click here for a voltage gap in series with an RC circuit placed on a dipole wiregeneral discussion of '''[[Preparing_Physical_Structures_for_Electromagnetic_Simulation#A_Review_of_Linear_.26_Nonlinear_Passive_.26_Active_Devices | Linear Passive Devices]]'''.

[[Image:Info_icon.png|40px]] Click here to learn more about '''[[Modeling_Lumped_Elements,_Circuits_%26_Devices_in_EM.Cube#Defining_Lumped_Elements_in_EM.Picasso_.26_EM.Libera | === Defining Lumped Elements]]'''.Ports ===

Ports are used to order and index gap sources for S parameter calculation. They are defined in the '''Observables''' section of the navigation tree. By default, as many ports as the total number of sources are created. You can define any number of ports equal to or less than the total number of sources. All port impedances are 50&Omega; by default. [[Image:Info_icon.png|40px]] Click here for a general discussion of to learn more about the '''[[Modeling_Lumped_Elements,_Circuits_%26_Devices_in_EMGlossary_of_EM.Cube%27s_Simulation_Observables_%26_Graph_Types#Linear_Passive_Devices Port_Definition_Observable | Linear Passive DevicesPort Definition Observable]]'''.

<td> [[Image:MOM6AMOM7A.png|thumb|500px360px|EM.Libera's Wire Lumped Element dialogTwo metallic strips hosting a gap source and a lumped element.]] </td></tr><tr><td> [[Image:MOM6CMOM7B.png|thumb|500px360px|EM.Libera's Strip Lumped Element dialogThe surface mesh of the two strips with a gap source and a lumped element.]] </td>

[[Image:port-definition.png|thumb|450px|== EM.Libera's Port Definition dialog.]]Simulation Data & Observables ==

At the end of a 3D MoM simulation, [[EM.Libera]] generates a number of output data files that contain all the computed simulation data. The primary solution of the Wire MoM simulation engine consists of the linear electric currents on the wires and wireframe structures. The primary solution of the Surface MoM simulation engine consists of the electric and magnetic surface currents on the PEC and dielectric objects. [[EM.Libera]] currently offers the following types of observables: {| class="wikitable"|-! scope="col"| Icon! scope= Defining Ports "col"| Simulation Data Type! scope="col"| Observable Type! scope="col"| Applications! scope="col"| Restrictions|-| style="width:30px;" | [[File:currdistr_icon.png]]| style="width:150px;" | Current Distribution Maps| style="width:150px;" | [[Glossary of EM.Cube's Simulation Observables & Graph Types#Current Distribution |Current Distribution]]| style="width:300px;" | Computing electric surface current distribution on metal and dielectric objects, magnetic surface current distribution on dielectric objects and linear current distribution on wires| style="width:250px;" | None|-| style="width:30px;" | [[File:fieldsensor_icon.png]]| style="width:150px;" | Near-Field Distribution Maps| style="width:150px;" | [[Glossary of EM.Cube's Simulation Observables & Graph Types#Near-Field Sensor |Near-Field Sensor]] | style="width:300px;" | Computing electric and magnetic field components on a specified plane in the frequency domain| style="width:250px;" | None|-| style="width:30px;" | [[File:farfield_icon.png]]| style="width:150px;" | Far-Field Radiation Characteristics| style="width:150px;" | [[Glossary of EM.Cube's Simulation Observables & Graph Types#Far-Field Radiation Pattern |Far-Field Radiation Pattern]]| style="width:300px;" | Computing the radiation pattern and additional radiation characteristics such as directivity, axial ratio, side lobe levels, etc. | style="width:250px;" | None|-| style="width:30px;" | [[File:rcs_icon.png]]| style="width:150px;" | Far-Field Scattering Characteristics| style="width:150px;" | [[Glossary of EM.Cube's Simulation Observables & Graph Types#Radar Cross Section (RCS) |Radar Cross Section (RCS)]] | style="width:300px;" | Computing the bistatic and monostatic RCS of a target| style="width:250px;" | Requires a plane wave source|-| style="width:30px;" | [[File:port_icon.png]]| style="width:150px;" | Port Characteristics| style="width:150px;" | [[Glossary of EM.Cube's Simulation Observables & Graph Types#Port Definition |Port Definition]] | style="width:300px;" | Computing the S/Y/Z parameters and voltage standing wave ratio (VSWR)| style="width:250px;" | Requires one of these source types: lumped, distributed, microstrip, CPW, coaxial or waveguide port|-| style="width:30px;" | [[File:huyg_surf_icon.png]]| style="width:150px;" | Equivalent electric and magnetic surface current data| style="width:150px;" | [[Glossary of EM.Cube's Simulation Observables & Graph Types#Huygens Surface |Huygens Surface]]| style="width:300px;" | Collecting tangential field data on a box to be used later as a Huygens source in other [[EM.Cube]] modules| style= "width:250px;" | None|}

Ports are used Click on each category to order and index gap sources for S parameter calculation. They are defined learn more details about it in the [[Glossary of EM.Cube'''s Simulation Observables''' section of the navigation tree. By default, as many ports as the total number of sources are created. You can define any number of ports equal to or less than the total number of sources. All port impedances are 50&Omega; by defaultGraph Types]].

Depending on the types of objects present in your project workspace, [[Image:Info_iconEM.png|40pxLibera]] Click here to learn more about performs either a Surface MoM simulation or a Wire MoM simulation. In the '''[[Common_Excitation_Source_Types_in_EMformer case, the electric and magnetic surface current distributions on the surface of PEC and dielectric objects can be visualized.Cube#The_Port_Definition_Observable | Port Definition Observable]]'''In the latter case, the linear electric currents on all the wires and wireframe objects can be plotted.

<table><tr><td> [[Image:MOM7wire_pic26_tn.png|thumb|360px|EMA monopole antenna connected above a PEC plate.Libera's short dipole source dialog]] </td><td> [[Image:wire_pic27_tn.png|thumb|360px|Current distribution plot of the monopole antenna connected above the PEC plate.]]</td></tr></table>

== Running 3D {{Note|Keep in mind that since [[EM.Libera]] uses MoM Simulations ==solvers, the calculated field value at the source point is infinite. As a result, the field sensors must be placed at adequate distances (at least one or few wavelengths) away from the scatterers to produce acceptable results.}}

Once you have set up your structure in EM<table><tr><td> [[Image:wire_pic32_tn.Libera, have defined sources and observables and have examined the quality png|thumb|360px|Electric field plot of the structure's mesh, you are ready to run a MoM simulationcircular loop antenna. EM]] </td><td> [[Image:wire_pic33_tn.Libera offers four types png|thumb|360px|Magnetic field plot of simulation:the circular loop antenna.]] </td></tr></table>

* Single-Frequency Analysis* Frequency Sweep* Parametric Sweep* You need to define a far field observable if you want to plot radiation patterns of your physical structure in [[OptimizationEM.Libera]]* HDMR Sweep. After a 3D MoM simulation is finished, three radiation patterns plots are added to the far field entry in the Navigation Tree. These are the far field component in Theta direction, the far field component in Phi direction and the total far field.

[[Image:Info_icon.png|40px30px]] Click here to learn more about the theory of '''[[Parametric_Modeling,_Sweep_Defining_Project_Observables_%26_Optimization26_Visualizing_Output_Data#Running_Parametric_Sweep_Simulations_in_EM.Cube Using_Array_Factor_to_Model_Antenna_Arrays | Running Parametric Sweep Simulations in EM.CubeUsing Array Factors to Model Antenna Arrays ]]'''.

<table><tr><td> [[Image:Info_iconwire_pic38_tn.png|40pxthumb|230px|The 3D radiation pattern of the circular loop antenna: Theta component.]] Click here to learn more about '''</td><td> [[Parametric_Modeling,_Sweep_%26_Optimization#Optimization Image:wire_pic39_tn.png| Running Optimization Simulations in EMthumb|230px|The 3D radiation pattern of the circular loop antenna: Phi component.Cube]]''' </td><td> [[Image:wire_pic40_tn.png|thumb|230px|The total radiation pattern of the circular loop antenna.]] </td></tr></table>

When the physical structure is excited by a plane wave source, the calculated far field data indeed represent the scattered fields. [[Image:Info_iconEM.png|40pxLibera]] Click here to learn more about '''calculates the radar cross section (RCS) of a target. Three RCS quantities are computed: the &theta; and &phi; components of the radar cross section as well as the total radar cross section, which are dented by &sigma;_&theta;, &sigma;_&phi;, and &sigma;_tot. In addition, [[Running_HDMR_Simulations_in_EM.Cube | Running HDMR Simulations in EM.CubeLibera]]calculates two types of RCS for each structure: '''Bi-Static RCS''' and '''Mono-Static RCS'''. In bi-static RCS, the structure is illuminated by a plane wave at incidence angles &theta;₀ and &phi;₀, and the RCS is measured and plotted at all &theta; and &phi; angles. In mono-static RCS, the structure is illuminated by a plane wave at incidence angles &theta;₀ and &phi;₀, and the RCS is measured and plotted at the echo angles 180°-&theta;₀; and &phi;₀. It is clear that in the case of mono-static RCS, the PO simulation engine runs an internal angular sweep, whereby the values of the plane wave incidence angles &theta; and &phi; are varied over the entire intervals [0°, 180°] and [0°, 360°], respectively, and the backscatter RCS is recorded.

=== Running To calculate RCS, first you have to define an RCS observable instead of a Single-Frequency MoM Analysis === radiation pattern. At the end of a PO simulation, the thee RCS plots &sigma;_&theta;, &sigma;_&phi;, and &sigma;_tot are added under the far field section of the navigation tree.

In a single-frequency analysis, the structure of your project workspace {{Note| The 3D RCS plot is meshed always displayed at the center frequency origin of the project and analyzed by one of EM.Libera's two MoM solvers. If your project contains at lease one line or curve objectspherical coordinate system, (0, 0,0), with respect to which the Wire MoM solver far radiation zone is automatically selecteddefined. OtherwiseOftentimes, this might not be the Surface MoM solver will always be used to simulate scattering center of your problem. In either case, the engine type is set automaticallyphysical structure. }}

To open the Run Simulation Dialog, click the '''Run''' [[File:run_icon.png]] button of the '''Simulate Toolbar''' or select '''Menu > Simulate > Run...''' or use the keyboard shortcut {{keyNote|Ctrl+R}}. By default, the Surface MoM solver is selected as your simulation engine. To start the simulation, click the {{key|Run}} button of this dialog. Once Computing the 3D MoM simulation starts, a new dialog called '''Output Window''' opens up that reports the various stages mono-static RCS may take an enormous amount of MoM simulation, displays the running computation time and shows the percentage of completion for certain tasks during the MoM simulation process. A prompt announces the completion of the MoM simulation. }}

<td> [[Image:MOM9Cwire_pic51_tn.png|thumb|360px230px|EM.Libera's Simulation Run dialog showing Wire MoM engine as the solverThe RCS of a metal plate structure: &sigma;_&theta;.]] </td><td> [[Image:MOM9Awire_pic52_tn.png|thumb|360px230px|EMThe RCS of a metal plate structure: &sigma;_&phi;.Libera's Simulation Run dialog showing Surface MoM engine as the solver]] </td><td> [[Image:wire_pic53_tn.png|thumb|230px|The total RCS of a metal plate structure: &sigma;_tot.]] </td>

=== Setting MoM Numerical Parameters =3D Mesh Generation in EM.Libera ==

MoM simulations involve a number of numerical [[parameters]] that normally take default values unless you change them=== A Note on EM. You can access these [[parameters]] and change their values by clicking on the Libera'''Settings''' button next to the &quot;Select Engine&quot; dropdown list in the '''Run Dialog'''. Depending on which MoM solver has been chosen for solving your problem, the corresponding Engine Settings dialog opens up.s Mesh Types ===

First we discuss the [[EM.Libera]] features two simulation engines, Wire MoM Engine Settings dialog. In the '''Solver''' section of this dialogand Surface MoM, you can choose the type of '''Linear Solver'''which require different mesh types. The current options Wire MoM simulator handles only wire objects and wireframe structures. These objects are '''LU''' and '''Bi-Conjugate Gradient discretized as elementary linear elements (BiCGfilaments)'''. The LU solver A wire is simply subdivided into smaller segments according to a direct solver mesh density criterion. Curved wires are first converted to multi-segment polylines and is then subdivided further if necessary. At the default option of the Wire MoM solver. The BiCG solver is iterative. If BiCG is selectedconnection points between two or more wires, you have junction basis functions are generated to set a '''Tolerance''' for its convergence. You can also change the maximum number of BiCG iterations by setting a new value for '''Max. No. of Solver Iterations / System Size'''ensure current continuity.

The On the other hands, [[EM.Libera]]'s Surface MoM Engine Settings dialog is bit more extensive and provides more options. In the "Integral Equation" section solver requires a triangular surface mesh of the dialog, you can choose among the three PEC formulations: EFIE, MFIE surface and CFIEsolid objects. The EFIE formulation is mesh generating algorithm tries to generate regularized triangular cells with almost equal surface areas across the default optionentire structure. In You can control the case of the CFIE formulation, you can set a value for cell size using the "AlphaMesh Density" parameter. By default, which determines the weights for the EFIE and MFIE mesh density is expressed in terms of the combine field formulationfree-space wavelength. The default value of this parameter mesh density is &alpha; = 010 cells per wavelength.4. The Surface MoM solver provides two types For meshing surfaces, a mesh density of linear solver: iterative TFQMR and direct LU. The former is the default option and asks for additional [[parameters]]: '''Error Tolerance''' and '''Max. No. of Solver Iterations'''. When the system size is large, typically above 3000, EM.Libera uses an acceleration technique called the Adaptive Integral Method (AIM) 7 cells per wavelength roughly translates to speed up the linear system inversion. You can set the "AIM Grid Spacing" parameter in 100 triangular cells per squared wavelength, which has a default value of 0.05&lambda;₀. EM.Libera's Surface MoM solver has been highly parallelized using MPI framework. When you install [[EM.Cube]] on your computerAlternatively, the installer program also installs the [[Windows]] MPI package on your computer. If you are using a multicore CPU, taking advantage of the MPI-parallelized solver can speed up your simulations significantly. In base the "MPI Settings" definition of the dialog, you can set the mesh density on "Number of CPU's UsedCell Edge Length", which has a default value of 4 coresexpressed in project units.

For both Wire MoM and Surface MoM solvers, you can instruct EM[[Image:Info_icon.Libera png|30px]] Click here to write the contents of the MoM matrix and excitation and solutions vectors into data files with learn more about '''[[Preparing_Physical_Structures_for_Electromagnetic_Simulation#Working_with_EM.DAT1Cube.27s_Mesh_Generators | Working with Mesh Generator]]''' file extensions. These files can be accessed from the  [[Image:Info_icon.png|30px]] Click here to learn more about '''Input/Output Files[[Preparing_Physical_Structures_for_Electromagnetic_Simulation#The_Triangular_Surface_Mesh_Generator | EM.Libera's Triangular Surface Mesh Generator ]]''' tab of the Data Manager. In both case, you have the option to uncheck the check box labeled "Superpose Incident plane Wave Fields". This option applies when your structure is excited by a plane wave source. When checked, the field sensors plot the total electric and magnetic field distributions including the incident field. Otherwise, only the scattered electric and magnetic field distributions are visualized.

<td> [[Image:MOM9BMesh5.png|thumb|360px400px|EM.Libera's Wire MoM Engine Settings dialog.]] </td><td> [[Image:MOM9.png|thumb|360px|EM.Libera's Surface MoM Engine Mesh Settings dialogshowing the parameters of the linear wireframe mesh generator.]] </td>

=== Running Frequency Sweep Simulations in EM.Libera The Linear Wireframe Mesh Generator ===

You can analyze metallic wire structures very accurately with utmost computational efficiency using [[Image:wire_pic24.png|thumb|450px| EM.Libera]]'s Frequency Settings dialogWire MoM simulator.]]In a frequency sweep simulationWhen you structure contains at least one PEC line, the operating frequency of the project is varied during the simulationpolyline or any curve CAD object, and the frequency response of your structure is computed at each frequency sample. [[EM.Libera offers two types of frequency sweep: uniform and adaptive]] will automatically invoke its linear wireframe mesh generator. In a uniform sweep, equally spaced frequency samples are generated between the start This mesh generator subdivides straight lines and end frequencies. In the case linear segments of an adaptive sweep, you must specify polyline objects into or linear elements according to the '''Maximum Number of Iterations''' as well as the '''Error'''specified mesh density. An adaptive sweep simulation starts It also polygonizes rounded [[Curve Objects|curve objects]] into polylines with a few initial frequency samples, where the Wire MoM engine is initially run. Then, the intermediate frequency samples side lengths that are calculated and inserted in a progressive manner. At each iteration, the frequency samples are used to calculate a rational approximation of the scattering parameter response over determined by the specified frequency rangemesh density. The process stops when the specified error criterion Note that polygonizing operation is met in a mean-square sense. The adaptive sweep simulation results are always continuous temporary and smooth. This is due to the fact that a rational function curve is fitted through the discrete frequency data points. This usually captures frequency response characteristics such as resonances with much fewer calculated data points. However, you have to make sure that the process converges. Otherwise, you might get an entirely wrong, but still perfectly smooth, curve at the end solely for he purpose of the simulationmesh generation. To run a 3D MoM frequency sweep, open the '''Run Simulation Dialog''' As for surface and select '''Frequency Sweep''' from the '''Simulation Mode''' dropdown list in this dialog. The '''Settings''' button located next to the simulation mode dropdown list becomes enabled. If you click this buttonsolid CAD objects, the Frequency Settings Dialog opens up. First you have to choose the '''Sweep Type''' with two options: '''Uniforms''' or '''Adaptive'''. The default option a wireframe mesh of these objects is created which consists of a uniform sweep. In the frequency settings dialog, you can set the start and end frequencies as well as the large number of frequency samplesinterconnected linear (wire) elements.

During a frequency sweep, as the project{{Note| The linear wireframe mesh generator discretizes rounded curves temporarily using CubeCAD's frequency changes, so does the wavelengthPolygonize tool. As a result, the mesh of the structure It also changes at each frequency samplediscretizes surface and solid CAD objects temporarily using CubeCAD's Polymesh tool. The frequency settings dialog gives you three choices regarding the mesh of the project structure during a frequency sweep:}}

* Fix <table><tr><td> [[Image:Mesh6.png|thumb|200px|The geometry of an expanding helix with a circular ground.]] </td><td> [[Image:Mesh7.png|thumb|200px|Wireframe mesh at of the highest frequencyhelix with the default mesh density of 10 cells/&lambda;₀.]] </td>* Fix <td> [[Image:Mesh8.png|thumb|200px|Wireframe mesh at of the center frequencyhelix with a mesh density of 25 cells/&lambda;₀.]] </td>* Re-<td> [[Image:Mesh9.png|thumb|200px|Wireframe mesh at each frequencyof the helix with a mesh density of 50 cells/&lambda;₀.]] </td></tr></table>

== Working with 3D MoM Simulation Data = Mesh of Connected Objects ===

At All the end of a 3D MoM simualtion, EM.Libera generates a number of output data files that contain all objects belonging to the computed simulation datasame PEC or dielectric group are merged together using the Boolean union operation before meshing. The primary solution of If your structure contains attached, interconnected or overlapping solid objects, their internal common faces are removed and only the Wire MoM simulation engine consists surface of the linear electric currents on the wires and wireframe structuresexternal faces is meshed. The primary solution of Similarly, all the Surface MoM simulation engine consists of the electric and magnetic surface currents on objects belonging to the same PEC group are merged together and dielectric objectstheir internal edges are removed before meshing. EM.Libera currently offers the following types of observables (click on each type to learn more about it): * '''[[Data_Visualization_and_Processing#Visualizing_3D_Current_Distribution_Maps | Current Distributions]]''': Electric Note that a solid and magnetic a surface current amplitude and phase on all metal and dielectric surfaces and electric current amplitude and phase on all wires * '''[[Data_Visualization_and_Processing#The_Field_Sensor_Observable | Near-Field Distributions]]''': Electric and magnetic field amplitude and phase on specified planes and their central axes* '''[[Data_Visualization_and_Processing#Computing_and_Graphing_Port_Characteristics | Port Characteristics]]''': S, Z and Y [[Parameters]] and Voltage Standing Wave Ratio (VSWR)* '''[[Data_Visualization_and_Processing#Far-Field_Observables | Radiation Characteristics]]''': Radiation Patterns, Directivity, Total Radiated Power, Axial Ratio, Main Beam Theta and Phi, Radiation Efficiency, Half Power Beam Width (HPBW), Maximum Side Lobe Level (SLL), First Null Level (FNL), Front-object belonging to-Back Ratio (FBR), etcthe same PEC group might not always be merged properly.* '''[[Data_Visualization_and_Processing#Computing_Radar_Cross_Section | Radar Cross Section (RCS)]]''': Bi-static and Mono-static Radar Cross Section (RCS)

If the project structure is excited by gap sources, and one When two objects belonging to two different material groups overlap or more ports have been definedintersect each other, [[EM.Libera calculates ]] has to determine how to designate the scattering (S) overlap or common volume or surface. As an example, the figure below shows a dielectric cylinder sitting on top of a PEC plate. The two object share a circular area at the base of the cylinder. Are the cells on this circle metallic or do they belong to the dielectric material group? Note that the cells of the junction are displayed in a different color then those of either groups. To address problems of this kind, [[parametersEM.Libera]] does provide a "Material Hierarchy" table, which you can modify. To access this table, select '''Menu > Simulate > discretization > Mesh Hierarchy...'''. The PEC groups by default have the highest priority and reside at the top of the selected ports, all based on table. You can select an group from the port impedances specified in table and change its hierarchy using the project's &quot;Port Definition&quot;{{key|Move Up}} or {{key|Move Down}} buttons of the dialog. You can also change the color of junction cells that belong to each group.

[[Image:Info_icon.png|40px]] Click here to learn more about '''[[Data_Visualization_and_Processing#Computing_and_Graphing_Port_Characteristics | Computing and Graphing Port Characteristics]]'''.<table><tr><td> [[Image:Info_icon.png|40px]] Click here to learn more about '''[[Data_Visualization_and_Processing#Rational_Interpolation_of_Port_Characteristics | Rational Interpolation of Scattering Parameters]]'''. [[Image:MOM10MOM3.png|thumb|350px300px|EM.Libera's Current Distribution Mesh Hierarchy dialog.]] </td></tr>Depending on the types of objects present in your project workspace, EM.Libera performs either a Surface MoM simulation or a Wire MoM simulation. In the former case, the electric and magnetic surface current distributions on the surface of PEC and dielectric objects can be visualized. In the latter case, the linear electric currents on all the wires and wireframe objects can be plotted.  [[Image:Info_icon.png|40px]] Click here to learn more about '''[[Data_Visualization_and_Processing#Visualizing_3D_Current_Distribution_Maps | Visualizing 3D Current Distribution Maps]]'''.</table>

<td> [[Image:wire_pic26_tnMOM1.png|thumb|360px|A monopole antenna connected above dielectric cylinder attached to a PEC plate.]] </td><td> [[Image:wire_pic27_tnMOM2.png|thumb|360px|Current distribution plot The surface mesh of the monopole antenna connected above the dielectric cylinder and PEC plate.]] </td>

EM.Libera allows you to visualize If the near fields at project workspace contains a specific field sensor plane of arbitrary dimensionsline object, the wireframe mesh generator is used to discretize your physical structure. Calculation From the point of near fields is a post-processing process view of this mesh generator, all PEC surface objects and may take PEC solid objects are treated as wireframe objects. If you want to model a considerable amount wire radiator connected to a metal surface, you have to make sure that the resulting wireframe mesh of time depending on the resolution that surface has a node exactly at the location where you specifywant to connect your wire. This is not guaranteed automatically. However, you can use [[EM.Cube]]'s polymesh objects to accomplish this objective.

{{Note|Keep in mind that since In [[EM.Libera uses MoM solversCube]], the calculated field value at the source point is infinite. As polymesh objects are regarded as already-meshed objects and are not re-meshed again during a result, the field sensors must be placed at adequate distances (at least one or few wavelengths) away from the scatterers to produce acceptable resultssimulation.}}

[[Image:Info_icon.png|40px]] Click here You can convert any surface object or solid object to learn more about a polymesh using CubeCAD's ''[[Data_Visualization_and_Processing#The_Field_Sensor_Observable | Defining a Field Sensor Observable]]'Polymesh Tool'''.

[[Image:Info_icon.png|40px30px]] Click here to learn more about '''[[Data_Visualization_and_ProcessingGlossary_of_EM.Cube%27s_CAD_Tools#Visualizing_3D_Near-Field_Maps Polymesh_Tool | Visualizing 3D Near Field MapsConverting Object to Polymesh]]'''in [[EM.Cube]]. Once an object is converted to a polymesh, you can place your wire at any of its nodes. In that case, [[EM.Libera]]'s Wire MoM engine will sense the coincident nodes between line segments and will create a junction basis function to ensure current continuity.

<td> [[Image:wire_pic32_tnMOM4.png|thumb|360px|Electric field plot Geometry of the circular loop antennaa monopole wire connected to a PEC plate.]] </td><td> [[Image:wire_pic33_tnMOM5.png|thumb|360px|Magnetic field plot Placing the wire on the polymesh version of the circular loop antennaPEC plate.]] </td>

[[Image:MOM12.png|thumb|380px|== Running 3D MoM Simulations in EM.Libera's Radiation Pattern dialog.]]==

You need to define a far field observable if you want to plot radiation patterns of your physical structure in === EM.Libera. After a 3D MoM simulation is finished, three radiation patterns plots are added to the far field entry in the Navigation Tree. These are the far field component in Theta direction, the far field component in Phi direction and the total far field. 's Simulation Modes ===

Once you have set up your structure in [[Image:Info_iconEM.png|40pxLibera]] Click here , have defined sources and observables and have examined the quality of the structure's mesh, you are ready to learn more about '''run a 3D MoM simulation. [[Data_Visualization_and_Processing#Far-Field_Observables | Far Field ObservablesEM.Libera]]'''.offers five simulation modes:

{| class="wikitable"|-! scope="col"| Simulation Mode! scope="col"| Usage! scope="col"| Number of Engine Runs! scope="col"| Frequency ! scope="col"| Restrictions|-| style="width:120px;" | [[Image#Running a Single-Frequency MoM Analysis| Single-Frequency Analysis]]| style="width:Info_icon270px;" | Simulates the planar structure "As Is"| style="width:80px;" | Single run| style="width:250px;" | Runs at the center frequency fc| style="width:80px;" | None|-| style="width:120px;" | [[Parametric_Modeling_%26_Simulation_Modes_in_EM.Cube#Running_Frequency_Sweep_Simulations_in_EM.pngCube |40pxFrequency Sweep]] Click here to learn | style="width:270px;" | Varies the operating frequency of the surface MoM or wire MoM solvers | style="width:80px;" | Multiple runs | style="width:250px;" | Runs at a specified set of frequency samples or adds more about frequency samples in an adaptive way| style="width:80px;" | None|-| style="width:120px;" | [[Parametric_Modeling_%26_Simulation_Modes_in_EM.Cube#Running_Parametric_Sweep_Simulations_in_EM.Cube | Parametric Sweep]]| style="width:270px;" | Varies the theory value(s) of '''one or more project variables| style="width:80px;" | Multiple runs| style="width:250px;" | Runs at the center frequency fc| style="width:80px;" | None|-| style="width:120px;" | [[Data_Visualization_and_ProcessingParametric_Modeling_%26_Simulation_Modes_in_EM.Cube#Using_Array_Factors_to_Model_Antenna_Arrays Performing_Optimization_in_EM.Cube | Using Array Factors to Model Antenna Arrays Optimization]]'''| style="width:270px;" | Optimizes the value(s) of one or more project variables to achieve a design goal | style="width:80px;" | Multiple runs | style="width:250px;" | Runs at the center frequency fc| style="width:80px;" | None|-| style="width:120px;" | [[Parametric_Modeling_%26_Simulation_Modes_in_EM.Cube#Generating_Surrogate_Models | HDMR Sweep]]| style="width:270px;" | Varies the value(s) of one or more project variables to generate a compact model| style="width:80px;" | Multiple runs | style="width:250px;" | Runs at the center frequency fc| style="width:80px;" | None|}

You can set the simulation mode from [[Image:Info_iconEM.png|40pxLibera]] Click here to learn more about '''[[Data_Visualization_and_Processing#Visualizing_3D_Radiation_Patterns | Visualizing s "Simulation Run Dialog". A single-frequency analysis is a single-run simulation. All the other simulation modes in the above list are considered multi-run simulations. If you run a simulation without having defined any observables, no data will be generated at the end of the simulation. In multi-run simulation modes, certain parameters are varied and a collection of simulation data files are generated. At the end of a sweep simulation, you can graph the simulation results in EM.Grid or you can animate the 3D Radiation Patterns]]'''simulation data from the navigation tree.

=== Running a Single-Frequency MoM Analysis ===  In a single-frequency analysis, the structure of your project workspace is meshed at the center frequency of the project and analyzed by one of [[Image:Info_iconEM.png|40pxLibera]] Click here 's two MoM solvers. If your project contains at least one line or curve object, the Wire MoM solver is automatically selected. Otherwise, the Surface MoM solver will always be used to learn more about simulate your numerical problem. In either case, the engine type is set automatically.  To open the Run Simulation Dialog, click the '''Run'''[[Data_Visualization_and_Processing#2D_Radiation_and_RCS_Graphs | Plotting 2D Radiation GraphsFile:run_icon.png]]button of the '''Simulate Toolbar''' or select '''Menu > Simulate > Run...''' or use the keyboard shortcut {{key|Ctrl+R}}. By default, the Surface MoM solver is selected as your simulation engine. To start the simulation, click the {{key|Run}} button of this dialog. Once the 3D MoM simulation starts, a new dialog called '''Output Window''' opens up that reports the various stages of MoM simulation, displays the running time and shows the percentage of completion for certain tasks during the MoM simulation process. A prompt announces the completion of the MoM simulation.

<td> [[Image:wire_pic38_tnLibera L1 Fig13.png|thumb|230pxleft|The 3D radiation pattern of 480px|EM.Libera's Simulation Run dialog showing Wire MoM engine as the circular loop antenna: Theta componentsolver.]] </td><td/tr> [[Image:wire_pic39_tn.png|thumb|230px|The 3D radiation pattern of the circular loop antenna: Phi component.]] </tdtr><td> [[Image:wire_pic40_tnMOM3D MAN10.png|thumb|230pxleft|The total radiation pattern of 480px|EM.Libera's Simulation Run dialog showing Surface MoM engine as the circular loop antennasolver.]] </td>

When the physical structure is excited by MoM simulations involve a plane wave source, the calculated far field data indeed represent the scattered fields. EM.Libera calculates the radar cross section (RCS) number of a targetnumerical parameters that normally take default values unless you change them. Three RCS quantities are computed: the &theta; You can access these parameters and &phi; components of change their values by clicking on the radar cross section as well as the total radar cross section, which are dented by &sigma;_&theta;, &sigma;_&phi;, and &sigma;_tot. In addition, EM.Libera calculates two types of RCS for each structure: '''Bi-Static RCSSettings''' and button next to the &quot;Select Engine&quot; dropdown list in the '''Mono-Static RCSRun Dialog'''. In bi-static RCSDepending on which MoM solver has been chosen for solving your problem, the structure is illuminated by a plane wave at incidence angles &theta;₀ and &phi;₀, and the RCS is measured and plotted at all &theta; and &phi; angles. In mono-static RCS, the structure is illuminated by a plane wave at incidence angles &theta;₀ and &phi;₀, and the RCS is measured and plotted at the echo angles 180°-&theta;₀; and &phi;₀. It is clear that in the case of mono-static RCS, the PO simulation engine runs an internal angular sweep, whereby the values of the plane wave incidence angles &theta; and &phi; are varied over the entire intervals [0°, 180°] and [0°, 360°], respectively, and the backscatter RCS is recordedcorresponding Engine Settings dialog opens up.

To calculate RCSFirst we discuss the Wire MoM Engine Settings dialog. In the '''Solver''' section of this dialog, first you have to define an RCS observable instead can choose the type of a radiation pattern'''Linear Solver'''. At The current options are '''LU''' and '''Bi-Conjugate Gradient (BiCG)'''. The LU solver is a direct solver and is the end default option of a PO simulation, the thee RCS plots &sigma;_&theta;Wire MoM solver. The BiCG solver is iterative. If BiCG is selected, &sigma;_&phi;, and &sigma;_tot are added under you have to set a '''Tolerance''' for its convergence. You can also change the far field section maximum number of the navigation treeBiCG iterations by setting a new value for '''Max. No. of Solver Iterations / System Size'''.

<table><tr><td> [[Image:Info_iconMOM9B.png|40px]] Click here to learn more about thumb|left|480px|EM.Libera'''[[Data_Visualization_and_Processing#Computing_Radar_Cross_Section | Computing Radar Cross Sections Wire MoM Engine Settings dialog.]]'''.</td></tr></table>

The Surface MoM Engine Settings dialog is bit more extensive and provides more options. In the "Integral Equation" section of the dialog, you can choose among the three PEC formulations: EFIE, MFIE and CFIE. The EFIE formulation is the default option. In the case of the CFIE formulation, you can set a value for the "Alpha" parameter, which determines the weights for the EFIE and MFIE terms of the combine field formulation. The default value of this parameter is &alpha; = 0.4. The Surface MoM solver provides two types of linear solver: iterative TFQMR and direct LU. The former is the default option and asks for additional parameters: '''Error Tolerance''' and '''Max. No. of Solver Iterations'''. When the system size is large, typically above 3000, [[Image:Info_iconEM.png|40pxLibera]] Click here uses an acceleration technique called the Adaptive Integral Method (AIM) to learn more about '''speed up the linear system inversion. You can set the "AIM Grid Spacing" parameter in wavelength, which has a default value of 0.05&lambda;₀. [[Data_Visualization_and_Processing#2D_Radiation_and_RCS_Graphs | Plotting 2D RCS GraphsEM.Libera]]'s Surface MoM solver has been highly parallelized using MPI framework. When you install [[EM.Cube]] on your computer, the installer program also installs the Windows MPI package on your computer. If you are using a multicore CPU, taking advantage of the MPI-parallelized solver can speed up your simulations significantly. In the "MPI Settings" of the dialog, you can set the "Number of CPU''s Used", which has a default value of 4 cores.

{{Note| The 3D RCS plot is always displayed at For both Wire MoM and Surface MoM solvers, you can instruct [[EM.Libera]] to write the origin contents of the spherical coordinate system, (0,0,0), MoM matrix and excitation and solutions vectors into data files with respect to which the far radiation zone is defined'''. Oftentimes, this might not DAT1''' file extensions. These files can be accessed from the scattering center '''Input/Output Files''' tab of the Data Manager. In both case, you have the option to uncheck the check box labeled "Superpose Incident plane Wave Fields". This option applies when your physical structureis excited by a plane wave source.}} {{Note|Computing When checked, the 3D mono-static RCS may take an enormous amount of computation timefield sensors plot the total electric and magnetic field distributions including the incident field. Otherwise, only the scattered electric and magnetic field distributions are visualized.}}

<td> [[Image:wire_pic51_tnMOM9.png|thumb|230pxleft|The RCS of a metal plate structure: &sigma;_&theta;.]] </td><td> [[Image:wire_pic52_tn.png640px|thumb|230px|The RCS of a metal plate structure: &sigma;_&phi;EM.]] </td><td> [[Image:wire_pic53_tn.png|thumb|230px|The total RCS of a metal plate structure: &sigma;_totLibera's Surface MoM Engine Settings dialog.]] </td>

<pbr />&nbsp; </phr> [[Image:Top_icon.png|48px30px]] '''[[EM.Libera#An_EM.Libera_Primer Product_Overview | Back to the Top of the Page]]''' [[Image:Tutorial_icon.png|30px]] '''[[EM.Cube#EM.Libera_Documentation | EM.Libera Tutorial Gateway]]'''

[[Image:Back_icon.png|40px30px]] '''[[EM.Cube | Back to EM.Cube Main Page]]'''