</table>
Wires can be automatically drawn and broken (redirected) at 90 degree angles. This feature can be turned on either from the Edit > Schematic Options menu or from the [[Schematic toolbar|Schematic Toolbar]]. In this case, wires will be drawn at the nearest 90 degrees to where the previous wire was segment ended. Wires can also be set to snap to the grid by choosing the respective option either in the Edit > Schematic Options menu or from the [[Schematic toolbar|Schematic Toolbar]].
Once wires are drawn, they can be manipulated like any part. Wires can be selected, dragged and deleted. Wire corners can be dragged and repositioned also. Click on a wire section to select it. Shift clicking on wires will select multiple wires. The entire wire can be select at once by double clicking on any part of the wire. Once selected, the wire(s) can be moved like any other part. Pressing the delete button will delete the selection from the circuit.