You can adjust the mesh resolution and increase the geometric fidelity of discretization by creating more and finer triangular facets. On the other hand, you may want to reduce the mesh complexity and send to the SBR engine only a few coarse facets to model your buildings. To adjust the mesh resolution, open the Mesh Settings Dialog by clicking the '''Mesh Settings''' [[File:mesh_settings.png]] button of the Simulate Toolbar or select '''Simulate > Discretization >''' '''Mesh Settings...'''. This dialog provides a single [[parameters]]: '''Edge Mesh Cell Size''', which has a default value of 100 project units. If you are already in the Mesh View Mode and open the Mesh Settings Dialog, you can see the effect of changing the mesh cell size using the {{key|Apply}} button.
Some additional mesh [[parameters]] can be accessed by clicking the {{key|Tessellation Options}} button of the dialog. In the Tessellation Options dialog, you can change the '''Curvature Angle Tolerance''' expressed in degrees, which has a default value of 45°. This parameter can affect the shape of the mesh especially in the case of [[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|solid objects]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] with curved surfaces. Note that unlike [[EM.Cube]]'s other computational modules that express the default mesh density based on the wavelength, the resolution of the SBR mesh generator is expressed in project length units. The default mesh cell size of 100 units might be too large for non-flat objects. You may have to use a smaller mesh cell size along with a lower curvature angle tolerance value to capture the curvature of your curved structures adequately.
<table>
EM.Terrano's transmitters always require a radiation pattern file unless you use a short dipole source to excite your structure. On the other hand, EM.Terrano's default receivers are assumed to be isotropic radiators. Although isotropic radiators do not exist as actual physical antennas, they make convenient and useful theoretical observables for the purpose of power coverage map calculations. EM.Terrano's isotropic receiving radiators are assumed to be polarization-matched to the incoming rays. As such, they have a unity gain and do not exhibit any polarization mismatch losses.
At the end of an SBR simulation, you can visualize the field maps and receiver power coverage map of your receiver sets. A coverage map shows the total '''Received Power''' by each of the receivers and is visualized as a color-coded intensity plot. Under each receiver set node in the navigation tree, a total of seven field maps together with a received power coverage map are added. The field maps include amplitude and phase plots for the three X, Y, Z field components plus a total electric field plot. To display a field or coverage map, simply click on its entry in the navigation tree. The 3D plot appears in the Main Window overlaid on your propagation scene. A legend box on the right shows the color scale and units (dB). The 3D coverage maps are displayed as horizontal confetti above the receivers. You can change the appearance of the receivers and maps from the property dialog of the receiver set. You can further customize the settings of the 3D field and coverage plots. Â [[Image:MORE.png|40px]] Click here to learn more about '''[[Data_Visualization_and_Processing#Visualizing_3D_Near-Field_Maps | Visualizing 3D Near-Field Maps]]'''.
At the end of a frequency sweep or parametric sweep SBR simulation, as many coverage maps as the number of sweep variable samples are generated and added to the navigation tree. In this case the additional seven field maps are saved to avoid a cluttered navigation tree. You can click on each of the coverage maps corresponding to each of the variable samples and visualize it in the project workspace. You can also animate the coverage maps on the navigation tree.
Â
[[Image:MORE.png|40px]] Click here to learn more about '''[[Data_Visualization_and_Processing#3D_Near_.26_Far_Field_Animation | Animating 3D Near-Field Maps]]'''.
<table>
</tr>
</table>
Â
You can change the settings of the coverage map by right clicking on its entry in the Navigation Tree and selecting '''Properties...''' or by double-clicking on the legend box. In the Output Plot Settings dialog, you can choose from one of three Color Map options: '''Default''', '''Rainbow''' and '''Grayscale'''. The visualization plot uses default values for the color scale. In the section titled "Limits", you can choose the radio button labeled '''User Defined'''. Then, you have to enter new values for the '''Lower''' and '''Upper''' Limits of the plot. You can also show or hide the Legend Box or change its '''Background''' and '''Foreground''' colors by clicking the buttons provided for this purpose.
=== Visualizing the Rays in the Scene ===