Asabet at 20:47, 23 April 2021

2021-04-23T20:47:30Z

Asabet at 19:23, 14 June 2019

2019-06-14T19:23:58Z

Asabet at 18:13, 20 June 2018

2018-06-20T18:13:15Z

Kazem Sabet at 22:22, 11 June 2018

2018-06-11T22:22:07Z

Asabet at 23:32, 5 July 2017

2017-07-05T23:32:42Z

Kazem Sabet: /* Wireframe Mesh */

2017-05-13T15:25:30Z

‎Wireframe Mesh

Kazem Sabet: /* Wireframe Mesh */

2017-05-12T15:11:04Z

‎Wireframe Mesh

Kazem Sabet: Created page with "== 3D Data Generator == ICON: None MENU: '''Simulate → 3D Data Generator...''' KEYBOARD SHORTCUT: {{key | Ctrl+Shift+D}} FUNCTION: Opens EM.Cube's 3D Data Gener..."

2017-05-01T21:49:59Z

Created page with "== 3D Data Generator == ICON: None MENU: '''Simulate → 3D Data Generator...''' KEYBOARD SHORTCUT: {{key | Ctrl+Shift+D}} FUNCTION: Opens EM.Cube's 3D Data Gener..."

New page

== 3D Data Generator ==

ICON: None

MENU: '''Simulate → 3D Data Generator...'''

KEYBOARD SHORTCUT: {{key | Ctrl+Shift+D}}

FUNCTION: Opens [[EM.Cube]]'s 3D Data Generator

PYTHON COMMAND: None

<table>
<tr>
<td> [[Image:data_generator_dlg.png|thumb|left|720px|EM.Cube's data generator dialog.]] </td>
</tr>
</table>

== Adaptive Yee Mesh ==

MODULE: [[EM.Tempo]]

FUNCTION: Generates a Yee brick mesh that adapts to the fine geometric details and material composition of the physical structure

PYTHON COMMAND: emtempo_mesh_settings(cells_per_lambda,ratio_contour,ratio_thin,ratio_abs)

ADAPTIVE YEE MESH PARAMETERS
{| class="wikitable"
|-
! scope="col"| Parameter Name
! scope="col"| Value Type
! scope="col"| Units
! scope="col"| Default Value
! scope="col"| Notes
|-
! scope="row" | minimum mesh density
| real numeric
| cells/lambda_eff
| 20
| effective wavelength in the material medium
|-
! scope="row" | minimum grid spacing for geometric contours
| real numeric
| -
| 0.4
| as a fraction of maximum grid spacing in free space
|-
! scope="row" | minimum grid spacing at thin or narrow regions
| real numeric
| -
| 0.4
| as a fraction of maximum grid spacing in free space
|-
! scope="row" | absolute minimum grid spacing
| real numeric
| -
| 0.15
| as a fraction of maximum grid spacing in free space
|-
! scope="row" | maximum adjacent cell size ratio
| real numeric
| -
| 1.3
| controls gradual grid transitions
|-
! scope="row" | curved edge angle tolerance
| real numeric
| degrees
| 15
| controls the initial tessellation of the physical structure
|}

<table>
<tr>
<td> [[Image:Tempo L1 Fig10.png|thumb|720px|EM.Tempo's mesh settings dialog.]] </td>
</tr>
</table>

== Boundary Conditions ==

ICON: [[File:bc icon.png]]

MENU: '''Simulate → Computational Domain → Boundary Conditions...'''

KEYBOARD SHORTCUT: None

FUNCTION: Sets the type of boundary conditions on the faces of the computational domain in [[EM.Tempo]] & [[EM.Ferma]]

PYTHON COMMAND: set_boundary_conditions(xn_type,xp_type,yn_type,yp_type,zn_type,zp_type)

== Custom Output ==

ICON: [[File:Custom icon.png]]

MENU: '''Simulate → Cutom Output...'''

KEYBOARD SHORTCUT: {{key | Ctrl+K}}

FUNCTION: Opens the list of the currently available user-defined custom Outputs

PYTHON COMMAND: None

<table>
<tr>
<td> [[Image:Custom2.png|thumb|left|550px|EM.Cube's Custom Output dialog.]] </td>
</tr>
</table>

== Data Manager ==

ICON: [[File:Data manager icon.png]]

MENU: '''Simulate → Data Manager...'''

KEYBOARD SHORTCUT: {{key | Ctrl+D}}

FUNCTION: Opens [[EM.Cube]]'s Data Manager

PYTHON COMMAND: None

<table>
<tr>
<td> [[Image:data_manager_dlg.png|thumb|left|640px|EM.Cube's data manager dialog.]] </td>
</tr>
</table>

== Delete All Data Files ==

ICON: None

MENU: '''Simulate → Delete All Data Files'''

KEYBOARD SHORTCUT: None

FUNCTION: Deletes all the data files in the current project folder

PYTHON COMMAND: None

== Discard All Visualization Data ==

ICON: None

MENU: '''Simulate → Discard All Visualization Data'''

KEYBOARD SHORTCUT: None

FUNCTION: Deletes all the visualization data under the "Observables" section of the navigation tree

PYTHON COMMAND: None

== Domain Settings ==

ICON: [[File:Domain icon.png]]

MENU: '''Simulate → Computational Domain → Domain Settings...'''

KEYBOARD SHORTCUT: {{key | Ctrl+A}}

FUNCTION: Sets the type & parameters of the computational domain

PYTHON COMMAND:

set_domain_offset(dxn_offset,dxp_offset,dyn_offset,dyp_offset,dzn_offset,dzp_offset)

set_domain_offset_lambda(dxn_offset,dxp_offset,dyn_offset,dyp_offset,dzn_offset,dzp_offset)

<table>
<tr>
<td> [[Image:domain_dlg.png|thumb|left|480px|CubeCAD's domain dialog.]] </td>
</tr>
</table>

== EM.Grid ==

ICON: None

MENU: '''Simulate → EM.Grid...'''

KEYBOARD SHORTCUT: {{key | Ctrl+Shift+G}}

FUNCTION: Opens EM.Grid for plotting data files

PYTHON COMMAND: plot_file(filename)

<table>
<tr>
<td> [[Image:emgrid.png|thumb|left|480px|EM.Grid showing a 2D radiation pattern plot.]] </td>
</tr>
</table>

== Facet Mesh ==

MODULE: [[EM.Terrano]]

FUNCTION: Generates a triangular surface mesh based on a specified edge length

PYTHON COMMAND: emterrano_mesh_settings(edge_length,angle_tol)

FACET MESH PARAMETERS
{| class="wikitable"
|-
! scope="col"| Parameter Name
! scope="col"| Value Type
! scope="col"| Units
! scope="col"| Default Value
! scope="col"| Notes
|-
! scope="row" | cell edge length
| real numeric
| project units
| 100
| determines the mesh resolution
|-
! scope="row" | curved edge angle tolerance
| real numeric
| degrees
| 45
| controls the initial tessellation of the physical structure
|-
! scope="row" | chord height
| real numeric
| project units
| 0
| controls the initial tessellation of the physical structure
|-
! scope="row" | maximum edge segment length
| real numeric
| project units
| 0
| controls the initial tessellation of the physical structure
|}

<table>
<tr>
<td>
[[Image:MESH MAN18.png|thumb|left|480px|The facet mesh settings dialog.]]
</td>
</tr>
</table>

== Fixed-Cell Brick Mesh ==

MODULE: [[EM.Tempo]], [[EM.Ferma]]

FUNCTION: Generates a uniform 3D brick mesh with specified cell dimensions along the three principal axes to which the physical structure is adapted

PYTHON COMMAND: emferma_mesh_settings(cell_size_x,cell_size_y,cell_size_z)

FIXED-CELL BRICK MESH PARAMETERS
{| class="wikitable"
|-
! scope="col"| Parameter Name
! scope="col"| Value Type
! scope="col"| Units
! scope="col"| Default Value
! scope="col"| Notes
|-
! scope="row" | cell_size_x
| real numeric
| project units
| 1
| -
|-
! scope="row" | cell_size_y
| real numeric
| project units
| 1
| -
|-
! scope="row" | cell_size_z
| real numeric
| project units
| 1
| -
|}

== Generate Input Files ==

ICON: None

MENU: '''Simulate → Generate Input Files...'''

KEYBOARD SHORTCUT: None

FUNCTION: Generates all the necessary input files to run a simulation in one of [[EM.Cube]]'s computational modules

PYTHON COMMAND: None

== Frequency Settings ==

ICON: [[File:Frequency-tool.png]]

MENU: '''Simulate → Frequency Settings...'''

KEYBOARD SHORTCUT: {{key | Ctrl+F}}

FUNCTION: Sets the center frequency and bandwidth of the project

NOTES, SPECIAL CASES OR EXCEPTIONS: You can also access the Frequency Settings dialog by double-clicking on the frequency box in the Status Bar. The default units of frequency and bandwidth are GHz. The other available options are Hz, kHz, MHz and THz. "fc" is a reserved project variable for its center frequency and "bw" is a a reserved project variable for its bandwidth. Both fc and bw must be expressed in Hz.

PYTHON COMMAND:

set_frequency(value)

set_bandwidth(value)

<table>
<tr>
<td> [[Image:Freq.png|thumb|left|480px|EM.Cube's Frequency Dialog.]] </td>
</tr>
</table>

== Functions ==

ICON: [[File:Functions icon.png]]

MENU: '''Simulate → Functions...'''

KEYBOARD SHORTCUT: {{key | Ctrl+I}}

FUNCTION: Opens the list of standard, preloaded and [[EM.Cube]] Python functions

PYTHON COMMAND: None

<table>
<tr>
<td> [[Image:functions_dlg.png|thumb|left|720px|EM.Cube's functions list.]] </td>
</tr>
</table>

== Hybrid Planar Mesh ==

MODULE: [[EM.Picasso]]

FUNCTION: Generates a surface mesh of planar structures containing mixed rectangular and triangular cells

PYTHON COMMAND: empicasso_mesh_settings(cells_per_lambda)

HYBRID PLANAR MESH PARAMETERS
{| class="wikitable"
|-
! scope="col"| Parameter Name
! scope="col"| Value Type
! scope="col"| Units
! scope="col"| Default Value
! scope="col"| Notes
|-
! scope="row" | mesh density
| real numeric
| cells/lambda_eff
| 20
| determines the mesh resolution as a function of operating frequency
|-
! scope="row" | maximum angle for defective cell removal
| real numeric
| degrees
| 5
| eliminates narrow cells with angles smaller than this value
|}

<table>
<tr>
<td>
[[Image:MESH MAN19.png|thumb|left|480px|The planar hybrid mesh settings dialog.]]
</td>
</tr>
</table>

== Materials ==

ICON: [[File:Materials icon.png]]

MENU: '''Simulate → Materials...'''

KEYBOARD SHORTCUT: {{key | Ctrl+T}}

FUNCTION: Opens [[EM.Cube]]'s materials list

PYTHON COMMAND: None

[[EM.Cube]] provides a preloaded database of popular and widely used materials. You can view the various material entries and their constitutive parameter values. You can also type in the first letter of a material to find it. For example, typing {{key | V}} selects '''Vacuum '''in the list.

<table>
<tr>
<td> [[Image:FDTD5.png|thumb|left|720px|[[EM.Cube]]'s Materials List.]] </td>
</tr>
</table>

== Mesh Generator ==

ICON: [[File:mesh_icon.png]]

MENU:

'''Simulate → Discretization → Show Mesh'''

'''Simulate → Discretization → Regenerate Mesh'''

KEYBOARD SHORTCUT: {{key | Ctrl+M}}

FUNCTION: Generates and displays the mesh of the physical structure in the current [[EM.Cube]] module

TO GENERATE AND VIEW A MESH:

# Click the '''Show Mesh''' [[File:mesh_tool.png]] button of the Simulate Toolbar.
# [[EM.Cube]]'s "Mesh View" mode is enabled, and a mesh of your physical structure in the currently active [[EM.Cube]] module appears in the project workspace.
# In the "Mesh View" mode, you can perform view operations like rotate view, pan or zoom, but you cannot create new objects or edit existing ones.
# To exit the mesh view mode, press the keyboard's {{key|Esc}} key or click the '''Show Mesh''' [[File:mesh_tool.png]] button once again.

PYTHON COMMAND: mesh()

NOTES, SPECIAL CASES OR EXCEPTIONS: Once a mesh is generated, it stays in the memory until the structure is changed or the mesh density or other settings are modified. Every time you view mesh, the one in the memory is displayed. You can force [[EM.Cube]] to create a new mesh from the ground up by selecting the menu item '''Simulate → Discretization → Regenerate Mesh''' or by right clicking on the '''Mesh''' item in the "Discretization" section of the navigation tree and selecting '''Regenerate''' from the contextual menu.

<table>
<tr>
<td> [[Image:mesh_view.png|thumb|left|640px|Generated mesh of a physical structure in CubeCAD.]] </td>
</tr>
</table>

== Mesh Settings ==

ICON: [[File:meshset_icon.png]]

MENU: '''Simulate → Discretization → Mesh Settings...'''

KEYBOARD SHORTCUT: {{key | Ctrl+G}}

FUNCTION: Sets the density or resolution of the mesh and other related parameters

TO CUSTOMIZE A MESH:

# Click the '''Mesh Settings''' [[File:mesh_settings.png]] button of the Simulate Toolbar.
# The Mesh Settings dialog of the currently c=active [[EM.Cube]] module opens up.
# From the '''Host''' drop-down list, select a line object. Note that only line parallel to one of the three principal axes are listed.
# By default, the lumped source is placed at the midpoint of the host line object. You can modify the '''Offset''' parameter, which is measured from the start point of the line and is always positive.
# Click the OK button of the dialog to return to the project workspace.
You can change the mesh algorithm from the dropdown list labeled '''Mesh Type''' if there is more than one option. You can also enter a different value for '''Mesh Density''' in cells per effective wavelength (λ<sub>eff</sub>). For each value of mesh density, the dialog also shows the average "Cell Edge Length" in the free space.

PYTHON COMMAND: mesh()

cubecad_mesh_settings(cell_size,angle_tol)

emtempo_mesh_settings(cells_per_lambda,ratio_contour,ratio_thin,ratio_abs)

emterrano_mesh_settings(edge_length,angle_tol)

emillumina_mesh_settings(cells_per_lambda)

emferma_mesh_settings(cell_size_x,cell_size_y,cell_size_z)

empicasso_mesh_settings(cells_per_lambda)

emlibera_mesh_settings(cells_per_lambda)

<table>
<tr>
<td> [[Image:mesh_settings_dlg.png|thumb|left|480px|CubeCAD's mesh settings dialog.]] </td>
</tr>
</table>

== Models ==

ICON: [[File:Models icon.png]]

MENU: '''Simulate → Python Models & Scripts...'''

KEYBOARD SHORTCUT: {{key | Ctrl+L}}

FUNCTION: Opens the list of the preloaded and currently available user-defined Python models and scripts

PYTHON COMMAND: None

<table>
<tr>
<td> [[Image:models_dlg.png|thumb|left|720px|EM.Cube's models dialog.]] </td>
</tr>
</table>

== Objectives ==

ICON: [[File:Objective icon.png]]

MENU: '''Simulate → Objective...'''

KEYBOARD SHORTCUT: {{key | Ctrl+J}}

FUNCTION: Opens the list of the currently available user-defined design objectives

PYTHON COMMAND: None

<table>
<tr>
<td> [[Image:Variable26.png|thumb|left|550px|EM.Cube's Objectives dialog.]]
</td>
</tr>
</table>

== Project Units ==

ICON: [[File:Ruler-tool.png]]

MENU: '''Simulate → Project Units...'''

KEYBOARD SHORTCUT: {{key | Ctrl+U}}

FUNCTION: Sets the geometrical units of the project

NOTES, SPECIAL CASES OR EXCEPTIONS: You can also access the Units dialog by double-clicking on the units box in the Status Bar. The default unit of a new project is millimeters. The other available options are microns, centimeters, meters, kilometers, mils, inches, feet and miles.

PYTHON COMMAND: set_units(units)

<table>
<tr>
<td> [[Image:Units.png|thumb|left|480px|EM.Cube's Units Dialog.]] </td>
</tr>
</table>

== Save Data As ==

ICON: None

MENU: '''Simulate → Save Data As...'''

KEYBOARD SHORTCUT: None

FUNCTION: Saves a project's data files in a specified subfolder other than the current project folder

NOTES, SPECIAL CASES OR EXCEPTIONS: This operation opens up the "Save Data" dialog with the default file path set to a subfolder named "Simulation Data" under your current project folder. You can choose the default subfolder name and location or change the name or browse to another location on your hard drive. it is important to keep in mind that before every simulation, [[EM.Cube]] deletes all the data files in the current project folder. In order to preserve your simulation data, you have to save them in a different folder other than the project folder.

PYTHON COMMAND: None

<table>
<tr>
<td>
[[Image:Savedata.png|thumb|left|480px|Saving a project's simulation data into a subfolder.]]
</td>
</tr>
</table>

== Simulation Engine Settings ==

ICON: None

MENU: '''Simulate → Simulation Engine Settings...'''

KEYBOARD SHORTCUT: {{key | Ctrl+Shift+N}}

FUNCTION: Sets the numerical user-accessible simulation parameters in one of [[EM.Cube]]'s computational modules

PYTHON COMMAND:

emtempo_engine_settings(engine,power_threshhold,max_timesteps)

emterrano_engine_settings(bounce_count,do_edge_diffraction,angular_resolution,ray_threshhold)

emillumina_engine_settings(engine,is_fixed_iteration,error_tol,max_iterations)

emferma_engine_settings(matrix_solver,error_tol,max_iterations)

empicasso_engine_settings(matrix_solver,error_tol,max_iterations)

emlibera_engine_settings_smom(matrix_solver,error_tol,max_iterations,ncpus,formulation,alpha)

emlibera_engine_settings_wmom(matrix_solver,error_tol,max_iterations)

== Simulation Run ==

ICON: [[File:Run icon.png]]

MENU: '''Simulate → Run...'''

KEYBOARD SHORTCUT: {{key | Ctrl+R}}

FUNCTION: Opens the Simulation Run dialog where you can set the simulation engine type & simulation mode and run a new simulation in one of [[EM.Cube]]'s computational modules

PYTHON COMMAND: run_analysis()

<table>
<tr>
<td> [[Image:Tempo L1 Fig13.png|thumb|left|480px|EM.Tempo's simulation run dialog.]] </td>
</tr>
</table>

== Triangular Surface Mesh ==

MODULE: [[EM.Illumina]], [[EM.Libera]], [[EM.Picasso]]

FUNCTION: Generates a highly regular triangular surface mesh based on a mesh density expressed in cells per effective wavelength

PYTHON COMMAND(S):

emillumina_mesh_settings(cells_per_lambda)

emlibera_mesh_settings(cells_per_lambda)

TRIANGULAR SURFACE MESH PARAMETERS
{| class="wikitable"
|-
! scope="col"| Parameter Name
! scope="col"| Value Type
! scope="col"| Units
! scope="col"| Default Value
! scope="col"| Notes
|-
! scope="row" | density
| real numeric
| cells/lambda_eff
| 10
| determines the mesh resolution as a function of operating frequency
|-
! scope="row" | curved edge angle tolerance
| real numeric
| degrees
| 15
| controls the initial tessellation of the physical structure
|-
! scope="row" | chord height
| real numeric
| project units
| 0
| controls the initial tessellation of the physical structure
|-
! scope="row" | maximum edge segment length
| real numeric
| project units
| 0
| controls the initial tessellation of the physical structure
|}

<table>
<tr>
<td>
[[Image:MESH MAN16.png|thumb|left|480px|The surface MoM triangular mesh settings dialog.]]
</td>
</tr>
<tr>
<td>
[[Image:MESH MAN17.png|thumb|left|480px|The physical optics triangular surface mesh settings dialog.]]
</td>
</tr>
</table>

== Update All Visualization Data ==

ICON: None

MENU: '''Simulate → Update All Visualization Data'''

KEYBOARD SHORTCUT: None

FUNCTION: Reloads all the visualization data under the "Observables" section of the navigation tree from the respective 3D data files in the current project file

NOTES, SPECIAL CASES OR EXCEPTIONS: This operation is particularly useful when the simulation engine resides on another computer (<i>e.g.</i> on a Linux machine) and is run from the command line. At the end of the simulation, you can transfer all the output simulation data files including the 3D data files like ".RAD", ".SEN", ".CUR", "RCS", etc. to your Windows computer for data visualization.

PYTHON COMMAND: None

== Variables ==

ICON: [[File:Variable icon tn.png]]

MENU: '''Simulate → Variables...'''

KEYBOARD SHORTCUT: {{key | Ctrl+B}}

FUNCTION: Opens the list of constants, default project variables and available user-defined variables

PYTHON COMMAND: None

<table>
<tr>
<td> [[Image:variables_dlg.png|thumb|left|550px|EM.Cube's variables dialog.]] </td>
</tr>
</table>

== Windows Calculator ==

ICON: [[File:Calc icon.png]]

MENU: '''Simulate → Windows Calculator...'''

KEYBOARD SHORTCUT: None

FUNCTION: Opens Windows calculator

PYTHON COMMAND: None

<table>
<tr>
<td> [[Image:WindCalc.png|thumb|left|480px|Windows scientific calculator.]] </td>
</tr>
</table>

== Wireframe Mesh ==

MODULE: [[EM.Libera]]

FUNCTION: Generates a polygonized mesh of curve objects and a regular triangular mesh of surface and [[Solid Objects|solid objects]]

PYTHON COMMAND: emlibera_mesh_settings(cells_per_lambda)

WIREFRAME MESH PARAMETERS
{| class="wikitable"
|-
! scope="col"| Parameter Name
! scope="col"| Value Type
! scope="col"| Units
! scope="col"| Default Value
! scope="col"| Notes
|-
! scope="row" | density
| real numeric
| cells/lambda_eff
| 10
| determines the mesh resolution as a function of operating frequency
|-
! scope="row" | curved edge angle tolerance
| real numeric
| degrees
| 15
| controls the initial tessellation of the physical structure
|-
! scope="row" | chord height
| real numeric
| project units
| 0
| controls the initial tessellation of the physical structure
|-
! scope="row" | maximum edge segment length
| real numeric
| project units
| 0
| controls the initial tessellation of the physical structure
|}

<table>
<tr>
<td>
[[Image:MESH MAN15.png|thumb|left|480px|The wire MoM mesh settings dialog.]]
</td>
</tr>
</table>

<br />

<hr>

[[Image:Top_icon.png|48px]] '''[[#Project Units | Back to the Top of the Page]]'''

[[Image:Back_icon.png|40px]] '''[[EM.Cube | Back to EM.Cube Main Page]]'''

@@ Line 6: / Line 6: @@
 [[Image:Back_icon.png|30px]] '''[[EM.Cube | Back to EM.Cube Main Page]]'''
 <br />
 == Adaptive Yee Mesh ==

@@ Line 11: / Line 11: @@
 ICON: None
-MENU: '''Simulate &rarr; 3D Data Generator...'''
+MENU: '''Simulate &rarr; Spatial Data Generator...'''
 KEYBOARD SHORTCUT: {{key | Ctrl+Shift+D}}

← Older revision		Revision as of 23:32, 5 July 2017
Line 709:		Line 709:
	MODULE: [[EM.Libera]]		MODULE: [[EM.Libera]]

−	FUNCTION: Generates a polygonized mesh of curve objects and a regular triangular mesh of surface and ~~[[Solid Objects\|~~solid objects]]	+	FUNCTION: Generates a polygonized mesh of curve objects and a regular triangular mesh of surface and solid objects

@@ Line 761: / Line 761: @@
 <hr>
-[[Image:Top_icon.png|30px]] '''[[#Project Units | Back to the Top of the Page]]'''
+[[Image:Top_icon.png|30px]] '''[[#3D_Data_Generator | Back to the Top of the Page]]'''
 [[Image:Back_icon.png|30px]] '''[[EM.Cube | Back to EM.Cube Main Page]]'''

@@ Line 761: / Line 761: @@
 <hr>
-[[Image:Top_icon.png|48px]] '''[[#Project Units | Back to the Top of the Page]]'''
+[[Image:Top_icon.png|30px]] '''[[#Project Units | Back to the Top of the Page]]'''
-[[Image:Back_icon.png|40px]] '''[[EM.Cube | Back to EM.Cube Main Page]]'''
+[[Image:Back_icon.png|30px]] '''[[EM.Cube | Back to EM.Cube Main Page]]'''

@@ Line 195: / Line 195: @@
 <table>
 <tr>
-<td> [[Image:emgrid.png|thumb|left|480px|EM.Grid showing a 2D radiation pattern plot.]] </td>
+<td> [[Image:emgrid.png|thumb|left|720px|EM.Grid showing a 2D radiation pattern plot.]] </td>
 </tr>
 </table>

← Older revision		Revision as of 22:22, 11 June 2018
Line 1:		Line 1:
		+	<table>
		+	<tr>
		+	<td>[[image:Cube-icon.png \| link=Getting_Started_with_EM.Cube]] [[image:cad-ico.png \| link=Building_Geometrical_Constructions_in_CubeCAD]] [[image:fdtd-ico.png \| link=EM.Tempo]] [[image:prop-ico.png \| link=EM.Terrano]] [[image:static-ico.png \| link=EM.Ferma]] [[image:planar-ico.png \| link=EM.Picasso]] [[image:metal-ico.png \| link=EM.Libera]] [[image:po-ico.png \| link=EM.Illumina]]</td>
		+	<tr>
		+	</table>
		+	[[Image:Back_icon.png\|30px]] '''[[EM.Cube \| Back to EM.Cube Main Page]]'''
		+	<br />
		+
	== 3D Data Generator ==		== 3D Data Generator ==

Glossary of EM.Cube's Simulation-Related Operations - Revision history

Asabet at 20:47, 23 April 2021

Asabet at 19:23, 14 June 2019

Asabet at 18:13, 20 June 2018

Kazem Sabet at 22:22, 11 June 2018

Asabet at 23:32, 5 July 2017

Kazem Sabet: /* Wireframe Mesh */

Kazem Sabet: /* Wireframe Mesh */

Kazem Sabet: Created page with "== 3D Data Generator == ICON: None MENU: '''Simulate → 3D Data Generator...''' KEYBOARD SHORTCUT: {{key | Ctrl+Shift+D}} FUNCTION: Opens EM.Cube's 3D Data Gener..."