All the objects belonging to the same PEC or dielectric group are merged together using the Boolean union operation before meshing. If your structure contains attached, interconnected or overlapping solid objects, their internal common faces are removed and only the surface of the external faces is meshed. Similarly, all the surface objects belonging to the same PEC group are merged together and their internal edges are removed before meshing. Note that a solid and a surface object belonging to the same PEC group might not always be merged properly.
When two objects belonging to two different material groups overlap or intersect each other, [[EM.Libera]] has to determine how to designate the overlap or common volume or surface. As an example, the figure below shows a dielectric cylinder sitting on top of a PEC plate. The two object share a circular area at the base of the cylinder. Are the cells on this circle metallic or do they belong to the dielectric material group? Note that the cells of the junction are displayed in a different color then those of either groups. To address problems of this kind, [[EM.Libera]] does provide a "Material Hierarchy" table, which you can modify. To access this table, select '''Menu > Simulate < > discretization < > Mesh Hierarchy...'''. The PEC groups by default have the highest priority and reside at the top of the table. You can select an group from the table and change its hierarch using the {{key|Move Up}} or {{key|Move Down}} buttons of the dialog. You can also change the color of junction cells that belong to each group.
<table>