! scope="row" | h
| real numeric
| project units meters
| 0.0015
| substrate height (thickness)
! scope="row" | h
| real numeric
| project units meters
| 0.0015
| substrate height (thickness)
! scope="row" | h
| real numeric
| project units meters
| 0.0015
| substrate height (thickness)
! scope="row" | h
| real numeric
| project units meters
| 0.0015
| substrate height (thickness)
| -
| distance between port planes and the open ends of the waveguide
|}
Â
== Coaxial Connector Wizard ==
Â
ICON: [[File:sma icon.png]]
Â
MENU: '''Tools → Component Wizards → Coaxial Connector'''
Â
MODULE(S): [[EM.Tempo]]
Â
FUNCTION: Creates the parameterized geometry of a coaxial connector of a specified characteristic impedance in the project workspace
Â
NOTES, SPECIAL CASES OR EXCEPTIONS: In [[EM.Tempo]], this wizard creates a one-port open-ended coaxial transmission line segment. In [[EM.Ferma]], it sets up a 2D solution plane for quasi-static analysis of the coaxial transmission line. The radius of the outer conductor is determined based on the specified characteristic impedance. It may be replaced by a numeric value instead.
Â
Â
PYTHON COMMAND(S): emag_sma_connector(er,z0,inner_rad,flange_size,len,ext_len)
Â
Â
COAXIAL CONNECTOR WIZARD PARAMETERS
{| border="0"
|-
| valign="top"|
|-
{| class="wikitable"
|-
! scope="col"| Parameter Name
! scope="col"| Value Type
! scope="col"| Units
! scope="col"| Default Value
! scope="col"| Notes
|-
! scope="row" | er
| real numeric
| -
| 2.2
| substrate relative permittivity
|-
! scope="row" | z0
| real numeric
| Ohms
| 50
| characteristic impedance
|-
! scope="row" | inner_rad
| real numeric
| meters
| 0.001
| radius of inner conductor
|-
! scope="row" | flange_size
| real numeric
| meters
| 0.001
| lateral size of the flange
|-
! scope="row" | len
| real numeric
| meters
| -
| length of the coaxial line segment
|-
! scope="row" | ext_len
| real numeric
| meters
| -
| length of the inner conductor extension beyond the flange
|}
Â
== Air Bridge Wizard ==
Â
ICON: [[File:bridge icon.png]]
Â
MENU: '''Tools → Component Wizards → Air Bridge'''
Â
MODULE(S): [[EM.Tempo]], [[EM.Picasso]]
Â
FUNCTION: Creates the parameterized geometry of an air bridge in the project workspace typically used to equalize the grounds of a CPW line
Â
NOTES, SPECIAL CASES OR EXCEPTIONS: In [[EM.Tempo]], this wizard creates a free-standing air bridge only. In [[EM.Picasso]], it also creates and sets the substrate parameters.
Â
Â
PYTHON COMMAND(S):
Â
emag_air_bridge_tempo(bridge_len,post_height,post_rad)
Â
emag_air_bridge_picasso(h,er,bridge_len,post_height,post_rad)
Â
Â
AIR BRIDGE WIZARD PARAMETERS
{| border="0"
|-
| valign="top"|
|-
{| class="wikitable"
|-
! scope="col"| Parameter Name
! scope="col"| Value Type
! scope="col"| Units
! scope="col"| Default Value
! scope="col"| Notes
|-
! scope="row" | h
| real numeric
| meters
| 0.0015
| substrate height (thickness) (only in [[EM.Picasso]])
|-
! scope="row" | er
| real numeric
| -
| 2.2
| substrate relative permittivity (only in [[EM.Picasso]])
|-
! scope="row" | bridge_len
| real numeric
| meters
| 0.01 ([[EM.Tempo]]) or 0.015 ([[EM.Picasso]])
| length of the bridge
|-
! scope="row" | post_height
| real numeric
| meters
| 0.004 ([[EM.Tempo]]) or 0.002 ([[EM.Picasso]])
| height of the two posts
|-
! scope="row" | post_rad
| real numeric
| meters
| 0.001
| radius of the two posts
|}
Â
== Solenoid Wizard ==
Â
ICON: [[File:solenoid icon.png]]
Â
MENU: '''Tools → Component Wizards → Solenoid'''
Â
MODULE(S): [[CubeCAD]], [[EM.Tempo]], [[EM.Ferma]], [[EM.Libera]]
Â
FUNCTION: Creates the parameterized geometry of a solenoid with a generalized super-quadratic cross section in the project workspace
Â
NOTES, SPECIAL CASES OR EXCEPTIONS: In [[EM.Ferma]], this wizard turns the solenoid into a wire current source.
Â
Â
PYTHON COMMAND(S):
Â
emag_solenoid(major_rad,minor_rad,height,turns,order,step)
Â
emag_solenoid_ferma(major_rad,minor_rad,height,turns,order,step,current,wire_rad)
Â
Â
SOLENOID WIZARD PARAMETERS
{| border="0"
|-
| valign="top"|
|-
{| class="wikitable"
|-
! scope="col"| Parameter Name
! scope="col"| Value Type
! scope="col"| Units
! scope="col"| Default Value
! scope="col"| Notes
|-
! scope="row" | major_rad
| real numeric
| project units
| 2
| major radius of the super-quadratic cross section
|-
! scope="row" | minor_rad
| real numeric
| project units
| 2
| minor radius of the super-quadratic cross section
|-
! scope="row" | height
| real numeric
| project units
| 10
| total height of the solenoid
|-
! scope="row" | turns
| integer numeric
| -
| 10
| total number of turns
|-
! scope="row" | order
| integer numeric
| -
| 2
| order of the super-quadratic curve, N = 2 produces an ellipse
|-
! scope="row" | step
| real numeric
| -
| 0.005
| increment in the interval [0, 2*pi] - determines the resolution of the curve
|-
! scope="row" | current
| real numeric
| Amp
| 1
| total current flowing through the solenoid (only in [[EM.Ferma]])
|-
! scope="row" | wire_rad
| real numeric
| project units
| 0.0005
| radius of the solenoid wire (only in [[EM.Ferma]])
|}
Â
== Coil Wizard ==
Â
ICON: [[File:coil icon.png]]
Â
MENU: '''Tools → Component Wizards → Toroidal Coil'''
Â
MODULE(S): [[CubeCAD]], [[EM.Tempo]], [[EM.Ferma]], [[EM.Libera]]
Â
FUNCTION: Creates the parameterized geometry of a toroidal helix coil with a generalized super-quadratic cross section in the project workspace
Â
NOTES, SPECIAL CASES OR EXCEPTIONS: In [[EM.Ferma]], this wizard turns the solenoid into a wire current source.
Â
Â
PYTHON COMMAND(S):
Â
emag_coil(major_rad,minor_rad_h,minor_rad_v,turns,order,step)
Â
emag_coil_ferma(major_rad,minor_rad_h,minor_rad_v,turns,order,step,current,wire_rad)
Â
Â
COIL WIZARD PARAMETERS
{| border="0"
|-
| valign="top"|
|-
{| class="wikitable"
|-
! scope="col"| Parameter Name
! scope="col"| Value Type
! scope="col"| Units
! scope="col"| Default Value
! scope="col"| Notes
|-
! scope="row" | major_rad
| real numeric
| project units
| 10
| radius of the circular axis
|-
! scope="row" | minor_rad_h
| real numeric
| project units
| 2
| horizontal radius of the super-quadratic cross section
|-
! scope="row" | minor_rad_v
| real numeric
| project units
| 2
| vertical radius of the super-quadratic cross section
|-
! scope="row" | turns
| integer numeric
| -
| 50
| total number of turns
|-
! scope="row" | order
| integer numeric
| -
| 2
| order of the super-quadratic curve, N = 2 produces an ellipse
|-
! scope="row" | step
| real numeric
| -
| 0.005
| increment in the interval [0, 2*pi] - determines the resolution of the curve
|-
! scope="row" | current
| real numeric
| Amp
| 1
| total current flowing through the coil (only in [[EM.Ferma]])
|-
! scope="row" | wire_rad
| real numeric
| project units
| 0.0005
| radius of the coil wire (only in [[EM.Ferma]])
|}