You can adjust the mesh resolution and increase the geometric fidelity of discretization by creating more and finer triangular facets. On the other hand, you may want to reduce the mesh complexity and send to the SBR engine only a few coarse facets to model your buildings. To adjust the mesh resolution, open the Mesh Settings Dialog by clicking the '''Mesh Settings''' [[File:mesh_settings.png]] button of the Simulate Toolbar or select '''Simulate > Discretization >''' '''Mesh Settings...'''. This dialog provides a single [[parameters]]: '''Edge Mesh Cell Size''', which has a default value of 100 project units. If you are already in the Mesh View Mode and open the Mesh Settings Dialog, you can see the effect of changing the mesh cell size using the {{key|Apply}} button.
Some additional mesh [[parameters]] can be accessed by clicking the {{key|Tessellation Options}} button of the dialog. In the Tessellation Options dialog, you can change the '''Curvature Angle Tolerance''' expressed in degrees, which has a default value of 45°. This parameter can affect the shape of the mesh especially in the case of [[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|[[Solid Objects|solid objects]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] with curved surfaces. Note that unlike [[EM.Cube]]'s other computational modules that express the default mesh density based on the wavelength, the resolution of the SBR mesh generator is expressed in project length units. The default mesh cell size of 100 units might be too large for non-flat objects. You may have to use a smaller mesh cell size along with a lower curvature angle tolerance value to capture the curvature of your curved structures adequately.
<table>
EM.Terrano's transmitters always require a radiation pattern file unless you use a short dipole source to excite your structure. On the other hand, EM.Terrano's default receivers are assumed to be isotropic radiators. Although isotropic radiators do not exist as actual physical antennas, they make convenient and useful theoretical observables for the purpose of power coverage map calculations. EM.Terrano's isotropic receiving radiators are assumed to be polarization-matched to the incoming rays. As such, they have a unity gain and do not exhibit any polarization mismatch losses.
At the end of an SBR simulation, you can visualize the field maps and receiver power coverage map of your receiver sets. A coverage map shows the total '''Received Power''' by each of the receivers and is visualized as a color-coded intensity plot. Under each receiver set node in the navigation tree, a total of seven field maps together with a received power coverage map are added. The field maps include amplitude and phase plots for the three X, Y, Z field components plus a total electric field plot. To display a field or coverage map, simply click on its entry in the navigation tree. The 3D plot appears in the Main Window overlaid on your propagation scene. A legend box on the right shows the color scale and units (dB). The 3D coverage maps are displayed as horizontal confetti above the receivers. You can change the appearance of the receivers and maps from the property dialog of the receiver set.
 You can visualize the coverage maps of individual receiver sets. At the end of a SBR simulation, each Received Power Coverage Map is listed under the receiver set's name in the Navigation Tree. To display a coverage map, simply click on its entry in the Navigation Tree. The coverage map plot appears in the Main Window overlaid on the scene. A legend box on the right shows the color scale and units (dB). The 3-D coverage maps are displayed as horizontal confetti above the receivers. If the receivers are packed close to each other, you will see a continuous confetti map. If the receivers are far apart, you will see individual colored squares. You can also visualize coverage maps as colored 3-D cubes. This may be useful when you set up your receivers in a vertical arrangement frequency sweep or the scene has a highly uneven terrain. To change the type of coverage map visualization, open the receiver set's property dialog and select the desired option for '''Coverage Map: Confetti''' or '''Cube''' in the '''"Visualization Options"''' section of the dialog. After the completion of a frequency parametric sweep SBR simulation, as many coverage maps as the number of frequency sweep variable samples are generated and added to the Navigation Tree under navigation tree. In this case the Receiver Set's entryadditional seven field maps are saved to avoid a cluttered navigation tree. You can click on each of the coverage maps corresponding to each of the frequency variable samples and visualize it in the project workspace. You can also animate the coverage mapson the navigation tree.
<table>
<tr>
<td> [[Image:prop_run11_tn.png|thumb|500px550px|Received power coverage map of an urban propagation scene.]] </td><td> [[Image:prop_run12_tn.png|thumb|500px550px|Total electric field map of an urban propagation scene.]] </td>
</tr>
</table>